Keep steering tight and the front suspension properly located with the Beck/Arnley Suspension Ball Joint 101-8603 (also written 1018603), a front lower ball joint that drops in as a direct-fit replacement for the 2015-2020 Honda Fit. It pivots the lower control arm against the steering knuckle, allowing the wheel to move up and down over bumps while turning — a job that shows its age through clunking on acceleration or over bumps, loose or wandering steering, and uneven tire wear when the joint wears out.
OE form, fit and function: designed to match the original part so it installs like the factory ball joint on the listed application.
Corrosion protection: coated or plated to resist rust.
Hardware as needed: necessary hardware is supplied where required for a complete installation, with functionality matching the original design.
Application specific: engineered for this vehicle, part of Beck/Arnley's foreign-nameplate program built with a global sourcing network.
If a worn front lower ball joint is the cause of your symptoms, this replaces it. Replacing left and right sides together is good practice for balanced handling.
Interchange: 51350T5RA01 · 51360T5RA01 · K500394
This part cross-references / interchanges with the following part numbers:
51350T5RA01, 51360T5RA01, K500394
Frequently Asked Questions
What vehicle does this ball joint fit?
It is a direct-fit replacement for the 2015-2020 Honda Fit. See the Buyer's Guide tab to confirm fitment for your specific vehicle.
What position is this ball joint?
It is a front lower suspension ball joint, connecting the lower control arm to the steering knuckle on the listed application.
What does a ball joint do?
It pivots the control arm against the steering knuckle, letting the wheel move over bumps while allowing the front wheels to steer.
What are signs this ball joint may need replacing?
Common signs include clunking over bumps or on acceleration, loose or wandering steering, and uneven front tire wear. Diagnose the cause before replacing.
Is mounting hardware included?
Necessary hardware is supplied as needed for a complete installation, with hardware functionality matching the original design requirements.
Anchor the front lower control arm to the steering knuckle and keep your steering tight with the Beck/Arnley Suspension Ball Joint 101-8074. This front lower ball joint is application-specific and...
Keep your steering tight and your suspension tracking true with the Beck/Arnley Suspension Ball Joint (P/N: 101-5320), a front lower ball joint that connects the lower control arm to the steering...
WARNING:
These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to
www.P65Warnings.ca.gov.
