Beck/Arnley Suspension Ball Joint P/N:101-6813

Be the first to review this product
$59.99
MPN: 101-6813
Item Package Code: EA
Part Has Core (Y/N): N
Item Package Quantity: 1
Adding to cart… The item has been added

Have questions?

Beck/Arnley Suspension Ball Joint P/N:101-6813
Beck/Arnley Suspension Ball Joint P/N:101-6813
$59.99

Keep steering tight and predictable with the Beck/Arnley Suspension Ball Joint 101-6813, a front lower Honda Element ball joint and direct replacement for foreign-nameplate applications. It bolts into the front lower control-arm-to-steering-knuckle joint on the 2002-2004 Acura RSX and 2003-2011 Honda Element, pivoting to allow the suspension to travel while the wheel steers.

  • Matches OE form, fit and function: engineered as an application-specific replacement for the listed vehicles.
  • Hardware included: mounting hardware is supplied, with functionality matched to the original design requirements.
  • Pre-greased: the joint arrives pre-greased and ready to install.
  • Sourced to Beck/Arnley specs: built through a global sourcing network for OE-level quality on foreign nameplates.

A worn ball joint can show up as clunking over the front end, loose or wandering steering, or uneven tire wear. If a failed front lower joint is the cause, this replaces it. Sold individually; ball joints wear as a pair, so inspect the opposite side and replace both together for balanced steering feel. Have the front end aligned after installation.

Interchange: 45D2310 · 51210S6M010 · 51215S6M010 · HNG614 · BJ50045 · BJ50045XL · K90493 · FA2213 · MK90493 · 5051310

This part cross-references / interchanges with the following part numbers:

45D2310, 51210S6M010, 51215S6M010, HNG614, BJ50045, BJ50045XL, K90493, FA2213, MK90493, 5051310

Frequently Asked Questions

Does this ball joint fit a Honda Element?

Yes. The Beck/Arnley 101-6813 is a front lower ball joint for the 2003-2011 Honda Element and the 2002-2004 Acura RSX. Check the Buyer's Guide tab to confirm your exact vehicle.

Is this a front lower ball joint?

Yes, it is cataloged as the front lower ball joint for the listed applications, connecting the front lower control arm to the steering knuckle.

Does it come pre-greased and with hardware?

Yes. The joint arrives pre-greased, and mounting hardware is included with functionality matched to the original design requirements.

Will one 101-6813 cover both sides?

No. It is sold individually. Because ball joints wear as a pair, inspect the opposite side and replace both together for balanced steering.

Do I need an alignment after installing this Rsx ball joint?

Yes. Replacing a front ball joint affects suspension geometry, so have the front end aligned after installation for correct handling and tire wear.