Beck/Arnley Suspension Control Arm P/N:102-8016
Beck/Arnley 102-5921 front right lower control arm for the 2002-2013 Toyota Camry and other vehicles connects the front right wheel to the chassis. This Beck/Arnley control arm matches OE form, fit and function.
Clunks over bumps, uneven front tire wear or vague steering can mean the arm or its bushings are worn. Before you replace it, rule out a loose sway bar link, a tired strut or a worn ball joint, which can give a similar clunk.
The 2002-2013 Toyota Camry, the 2001-2007 Toyota Highlander and the 2005-2012 Toyota Avalon all fit this control arm, and so do more vehicles. Open the "Vehicles it fits" section and look up your exact model and engine to see whether your car is covered. The car takes one arm on each side of the front axle. This listing is the front right one, the front left is ordered separately, and the pair is normally replaced together.
Fit and size
Build and materials
One control arm with its bushings. Hardware and a ball joint are not included, so plan on new bolts because the old ones may not be reusable.
Interchange: 62244804 · 522724 · 37151014500 · 4806806150 · 4806833060 · 4806833070 · RK642725 · FA4270 · CMS86182 · 4806806170 · W01331744694
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Is Beck/Arnley 102-5921 the right Toyota Camry control arm for a 2002-2013 model?
Yes. Beck/Arnley 102-5921 fits the 2002-2013 Toyota Camry in the front right lower position. The front left side is a separate part.
Can I use this Toyota Highlander control arm on a 2001-2007 model?
Yes. Beck/Arnley 102-5921 fits the 2001-2007 Toyota Highlander in the front right lower position.
Does the Beck/Arnley control arm come with a ball joint?
No. This control arm comes without a ball joint, and hardware is not included, but the bushings are.
Is this front right lower control arm steel, and is it coated?
Yes. It has steel construction with a coating for rust and corrosion resistance.
Which signs can mean a suspension control arm on the front right is worn?
A clunk over bumps, uneven front tire wear or vague steering can mean the arm or its bushings are worn. Suspension and steering parts should be inspected promptly.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.