Beck/Arnley 102-7932 front right lower control arm for the 2004-2006 Acura TL connects the front right wheel assembly to the chassis and lets the suspension move.
- Steel construction with a coating for rust and corrosion resistance
- Control arm body sold without a ball joint
- Bushings included with the arm
- Fixed design that is not adjustable
Quick facts
- Part: Beck/Arnley 102-7932 control arm
- Also called: suspension control arm
- Fits: 2004-2006 Acura TL
- Position: Front right lower
- Material: Steel
- Condition: New
A worn suspension control arm or bushing can show up as clunking over bumps, uneven tire wear or wandering steering. Before you replace the arm, rule out a worn ball joint, sway bar link or strut mount, since those can make similar noises, and have a shop test anything that needs the vehicle raised.
Fits
This arm is a direct replacement for the 2004-2006 Acura TL, with OE form, fit and function. The listing is one side of the front axle; the left lower arm is normally replaced at the same time.
Specifications
Fit and size
- Position: Front right lower
- Quantity per vehicle: 1 for this side
- Adjustable: No
Build and materials
- Material: Steel
- Coating: Corrosion resistant
- Bushings: Included
- Ball joint: Not included
- Hardware: Not included
- Condition: New
In the box
One front right lower control arm with its bushings; the 2004-2006 Acura TL takes one on this side. The ball joint and mounting hardware are not included, so plan on new bolts rather than reusing the old ones.
Interchange: 51350SEPA00 · 270396919 · 62240815 · 37101027001 · RK641544 · FA3993 · CMS601022
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
51350SEPA00, 270396919, 62240815, 37101027001, RK641544, FA3993, CMS601022
Frequently Asked Questions
Is this 2004-2006 Acura TL control arm the front right lower one?
Yes. Beck/Arnley 102-7932 is the front right lower control arm for the 2004-2006 Acura TL, and the left side is a separate part.
Does this Beck/Arnley control arm come with a ball joint?
No. Beck/Arnley 102-7932 comes without a ball joint, and mounting hardware is not included, though the bushings are.
Is this front right lower arm adjustable?
No. It is a fixed, non-adjustable design made of steel with a corrosion-resistant coating.
Can a clunk over bumps come from lower control arm bushings?
Yes, it can. Worn bushings may also show as uneven tire wear or vague steering, but other suspension parts make similar noises, so have the front end inspected.
Is 51350SEPA00 a number this control arm replaces?
Yes. 51350SEPA00 is on the interchange list for Beck/Arnley 102-7932, along with RK641544, FA3993 and several other numbers.
