Beck/Arnley 102-8010 rear right upper center control arm for the 2017-2021 BMW 230i and other vehicles locates the rear wheel as the suspension moves.
- Control arm supplied without a ball joint
- Steel, iron, or aluminum construction for durability and rust and corrosion resistance
- New hardware and bushings included where applicable
Quick facts
- Part: Beck/Arnley 102-8010 control arm
- Also called: suspension control arm
- Fits: 2017-2021 BMW 230i and other vehicles
- Position: Rear right upper center
- Material: Steel, iron, or aluminum
- Condition: New
A worn rear arm can show up as a clunk over bumps, uneven tire wear or wandering. Other suspension parts can produce similar symptoms, so have a shop inspect the arm and its bushings for cracks, tears or bending. If the Beck/Arnley control arm on this corner is at fault, this part replaces it.
Fits
The 2017-2021 BMW 230i xDrive and the 2017-2021 BMW M240i are among the cars it fits, along with many other BMW models; the arm is application specific and matches OE form, fit and function. For any other BMW, check your year and model in the "Vehicles it fits" section. This listing is one arm for the rear right position; the rear left is a separate part, and both are normally replaced together.
Specifications
Fit and size
- Position: Rear right upper center
- Quantity per position: 1
Build and materials
- Material: Steel, iron, or aluminum
- Ball joint: not included
- Condition: New
Interchange: 33326792544 · CA14558 · RK643546 · CMS101382
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
33326792544, CA14558, RK643546, CMS101382
Frequently Asked Questions
Does the Beck/Arnley 102-8010 fit a 2017-2021 BMW M240i?
Yes, Beck/Arnley 102-8010 is the rear right upper center control arm for the 2017-2021 BMW M240i and the 2017-2021 BMW 230i; other models are in the "Vehicles it fits" section.
Does this suspension control arm come with a ball joint?
No, Beck/Arnley 102-8010 comes without a ball joint, which matches the OE design, and new hardware and bushings come with it where applicable.
Is this control arm for the left or right side of the rear?
It is the rear right upper center position. The rear left uses its own separate control arm.
Can a worn rear upper control arm cause a clunk over bumps?
Yes, if the arm or its bushings are worn, but other suspension parts make a similar noise; uneven tire wear is another sign.
Does Beck/Arnley 102-8010 interchange with CA14558?
Yes. CA14558 is one of the numbers this arm replaces, along with 33326792544, RK643546 and CMS101382.
