Bosch Direct Injection High Pressure Fuel Pump P/N:66802
Bosch 66804 direct injection high pressure fuel pump for the 2016-2023 Mercedes-Benz Metris 4-cylinder 2.0L and other vehicles feeds high-pressure fuel to a gasoline direct injection system. Bosch builds it on the same production lines as its OE fuel pumps.
Hard starting, rough running, a loss of power or a check engine light can point to a worn high pressure pump. These signs alone do not prove the pump is the problem; a clogged fuel filter can look the same.
This high pressure fuel pump is a direct-fit replacement for the 2016-2023 Mercedes-Benz Metris 4-cylinder 2.0L, the 2019-2023 Mercedes-Benz Sprinter 1500 4-cylinder 2.0L and the 2019-2023 Mercedes-Benz Sprinter 2500 4-cylinder 2.0L. A 2016-2023 Mercedes-Benz Metris 4-cylinder 2.0L takes one pump, and this listing is one. If your Mercedes-Benz is not named here, enter its year and engine in the "Vehicles it fits" section to see whether this pump suits it.
Fit and size
Build and materials
One direct injection high pressure fuel pump with its O-ring. A lock ring and a wire harness are not included.
Interchange: 2740700501
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Does the Bosch 66804 high pressure fuel pump fit the 2016-2023 Mercedes-Benz Metris 4-cylinder 2.0L?
Yes. Bosch 66804 is a direct-fit replacement for the 2016-2023 Mercedes-Benz Metris 4-cylinder 2.0L, which takes one pump.
What comes in the box with this direct injection fuel pump?
The box holds one high pressure fuel pump with its O-ring. A lock ring and a wire harness are not included.
What size are the inlet and outlet fittings on the Bosch 66804 pump?
On Bosch 66804 the inlet is 8 mm and the outlet is 16 mm with an M16 x 1.5 thread. The outside diameter is 16 mm.
What can a failing GDI high pressure pump do to the engine?
Signs can include hard starting, rough running or reduced power. A shop can test fuel pressure on a direct injection system.
Is the Bosch 66804 pump plug-and-play to install?
Yes. Bosch 66804 is designed for simple plug-and-play installation, and Bosch makes it in-house rather than sourcing or reverse-engineering it.
Published by the manufacturer of this part. Links open in a new tab.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.