Bosch Direct Injection High Pressure Fuel Pump P/N:66811
Bosch 66848 direct injection high pressure fuel pump for the 2019-2026 BMW Z4 4-cylinder 2.0L, the 2020-2026 Z4 6-cylinder 3.0L and other vehicles delivers fuel at high pressure to the injectors of a gasoline direct injection system. It is a new, metered piston pump.
Hard starting, rough running or less power can mean the high pressure pump is weak. A low-pressure fuel pump, a clogged fuel filter, a faulty injector or a bad ignition coil can sit behind the same signs, so find the cause before buying. This listing is one pump, and the quantity per vehicle depends on the application.
The 2021-2026 BMW M3 6-cylinder 3.0L and the 2021-2026 BMW M4 6-cylinder 3.0L take this pump as well, along with many other BMW and MINI models. If your car is not named here, look it up in the "Vehicles it fits" section.
Fit and size
Build and materials
One direct injection high pressure fuel pump with its o-ring seal. A wire harness, lock ring and fuel sending unit are not included.
Interchange: 13518631642
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Is the Bosch 66848 fuel pump right for the 2021-2026 BMW M3 6-cylinder 3.0L?
Yes. Bosch 66848 fits the 2021-2026 BMW M3 6-cylinder 3.0L. If your car is a different one, look it up in the "Vehicles it fits" section.
Does the Bosch 66848 direct injection high pressure fuel pump include a wire harness or lock ring?
No. Bosch 66848 comes as one pump with its o-ring seal; the wire harness, lock ring and fuel sending unit are not included.
What thread does the outlet fitting on this direct injection high pressure fuel pump use?
The outlet fitting thread is M16 x 1.5. This pump has a 14 mm outlet size and a 14 mm inlet size.
How can I tell if a direct injection high pressure fuel pump is wearing out?
Hard starting, a rough-running engine or less power can be signs of a weak pump. A shop can test fuel pressure to confirm.
Is this Bosch direct injection high pressure fuel pump plug-and-play?
Yes, it is designed for plug-and-play installation. Every Bosch pump is also function tested at the end of the line before it leaves the factory.
Published by the manufacturer of this part. Links open in a new tab.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.