Bosch 13355 oxygen sensor for the 1994-2006 Toyota Camry V6 3.0L, the 2003-2006 Camry 4-cylinder 2.4L, the 2004-2006 Camry V6 3.3L and other vehicles measures exhaust oxygen and reports the air-fuel ratio to the ECU. That feedback helps the ECU keep combustion stable and emissions down across a wide range of operating conditions.
- Heated narrow-band switching-type sensor that gives the ECU air-fuel-ratio readings
- Reaches operating temperature in less than 10 seconds for quick closed-loop control at cold start
- Metal housing with an integrated heater element and TSP coating to resist vibration, corrosion and contamination
- Built to withstand exhaust streams up to 1,880°F
Quick facts
- Part: Bosch 13355 oxygen sensor
- Fits: the 1994-2006 Toyota Camry V6 3.0L, the 2003-2006 Camry 4-cylinder 2.4L, the 2004-2006 Camry V6 3.3L and other vehicles
- Position: Upstream, downstream, downstream left, downstream right, downstream front
- Material: Metal (housing)
- Condition: New
A check engine light, a rough idle or poorer fuel economy can mean a worn oxygen sensor. Before you replace it, rule out a damaged connector or an exhaust leak ahead of the sensor, since either one can skew the readings the ECU receives.
Fits
This oxygen sensor also fits the 2013-2015 Toyota Tacoma 4-cylinder 2.7L, the 2006-2008 Toyota RAV4 4-cylinder 2.4L and the 2009-2018 RAV4 4-cylinder 2.5L, along with many other vehicles. Driving something else? Look up your car in the "Vehicles it fits" section. This listing is one sensor; the 1994-2001 Toyota Camry V6 3.0L takes two, while the 2003-2006 Toyota Camry 4-cylinder 2.4L takes one.
Specifications
Fit and size
- Position: Upstream, downstream, downstream left, downstream right, downstream front
- Quantity per vehicle: 1 or 2, depending on the vehicle
- Thread size: M18 - 1.5
- Hex size: 22 mm
- Length (sealing surface to end of connector): 14.6 in
Build and materials
- Type: Narrow-band, heated
- Housing material: Metal
- Condition: New
- Warranty: Bosch 1-year, unlimited-mileage warranty for non-commercial passenger cars and light trucks
In the box
One oxygen sensor with its wiring harness. A mounting bracket is not included.
Installation notes
- Conductive anti-seize comes pre-applied on the threads.
- Direct-fit connectors for quick installation.
Frequently Asked Questions
Is this Toyota Camry oxygen sensor right for the 2003-2006 Camry 4-cylinder 2.4L?
Yes. Bosch 13355 fits the 2003-2006 Toyota Camry 4-cylinder 2.4L, which takes one sensor. For a different car, look it up in the "Vehicles it fits" section.
Does this 2002 Toyota Camry O2 sensor fit the V6 3.0L engine?
Yes. This sensor fits the 2002-2006 Toyota Camry V6 3.0L, and that engine takes one.
Is this Bosch O2 sensor heated?
Yes. Bosch 13355 is a heated narrow-band oxygen sensor with an M18 - 1.5 thread and a 22 mm hex size.
Does this oxygen sensor come with a wiring harness and mounting bracket?
Yes for the wiring harness, which is included. A mounting bracket is not included.
Is anti-seize already on the threads of this oxygen sensor?
Yes. Conductive anti-seize is pre-applied to the threads, and the connectors are direct-fit.
