Oxygen Sensor for 2001-2005 Dodge Stratus & More - Bosch 13801

Be the first to review this product

$51.99

MPN: 13801

Item Package Quantity: 1

Current Stock:

Quantity:

Adding to cart… The item has been added

Have questions?

Ask an Expert

Bosch Oxygen Sensor P/N:13801

$51.99

Description

Bosch 13801 oxygen sensor for the 2001-2005 Dodge Stratus 4-cylinder 2.4L, the 2002-2003 Stratus V6 3.0L and other vehicles measures the oxygen in the exhaust and sends air-fuel-ratio readings to the ECU. As a Bosch premium oxygen sensor, it helps the ECU hold stable combustion control and reduce emissions.

Heated narrow-band switching-type sensor that gives the ECU air-fuel-ratio measurements
Withstands exhaust gas up to 1,880°F; TSP coating resists vibration, corrosion and contamination
Reaches operating temperature in less than 10 seconds for quick closed-loop control and cold-start performance
Integrated heater element and advanced ceramic element for consistent signal under thermal and vibration loads

Quick facts

Part: Bosch 13801 oxygen sensor
Fits: 2001-2005 Dodge Stratus 4-cylinder 2.4L, the 2002-2003 Stratus V6 3.0L and other vehicles
Position: upstream, downstream, upstream left, upstream right, downstream left, downstream right, upstream rear, upstream front
Material: metal housing
Condition: New

A worn oxygen sensor can show up as a check engine light, rough running or poorer fuel economy. Before you replace this sensor, rule out a damaged connector or an exhaust leak near the sensor that could trigger the same warning light.

Fits

The vehicles it fits include the 2001-2005 Chrysler Sebring 4-cylinder 2.4L, the 2002-2003 Sebring V6 3.0L, the 2000-2005 Mitsubishi Eclipse 4-cylinder 2.4L and the 2001-2003 Eclipse V6 3.0L. This listing is one sensor, and the 2001-2005 Dodge Stratus 4-cylinder 2.4L takes one.

Specifications

Fit and size

Position: upstream, downstream, upstream left, upstream right, downstream left, downstream right, upstream rear, upstream front
Quantity per vehicle: 1
Thread size: M18 - 1.5
Hex size: 22 mm
Length (sealing surface to end of connector): 21.7 in

Build and materials

Type: narrow-band heated switching-type
Housing material: metal
Condition: new
Warranty: Bosch 1-year, unlimited-mileage warranty for non-commercial passenger cars and light trucks

In the box

One oxygen sensor with its wiring harness. A mounting bracket is not included.

Installation notes

Conductive anti-seize comes pre-applied on the threads.
Direct-fit connectors allow quick installation.

Manufacturer's Description

Product Specs

Buyer's Guide

Interchange Part Numbers

Frequently Asked Questions

Is Bosch 13801 an oxygen sensor for the 2000-2005 Mitsubishi Eclipse 4-cylinder 2.4L?

Yes. Bosch 13801 fits the 2000-2005 Mitsubishi Eclipse 4-cylinder 2.4L and the 2001-2003 Eclipse V6 3.0L. If your car isn't named, look it up by year and engine on the Buyer's Guide tab.

Does Bosch 13801 work as an oxygen sensor for the 2001-2005 Chrysler Sebring 4-cylinder 2.4L?

Yes. Bosch 13801 fits the 2001-2005 Chrysler Sebring 4-cylinder 2.4L and the 2002-2003 Sebring V6 3.0L, one sensor per car.

What type of Bosch O2 sensor is the 13801?

Bosch 13801 is a heated, narrow-band switching-type sensor with an M18 - 1.5 thread and a 22 mm hex.

How can I look over this heated narrow-band oxygen sensor for damage?

With the engine off and cool, look at the sensor body and its wiring for cracks, melted insulation or exhaust leak marks. A shop can test the sensor's signal.

Does the Bosch 13801 come with anti-seize on the threads?

Yes. Its threads have pre-applied conductive anti-seize, and the sensor comes with its wiring harness. A mounting bracket is not included.