Bosch 15736 oxygen sensor for the 1993-1995 Volkswagen Jetta 4-cylinder 2.0L, the 1994 Jetta V6 2.8L and other vehicles gives the engine control system air-fuel-ratio feedback from the exhaust. This Bosch premium oxygen sensor is a heated, narrow-band unit that connects to the existing harness through its own connectors.
A worn oxygen sensor can show up as a check engine light, rough running or poor fuel economy, though other faults produce the same signs. Before buying one, work out what is behind them: with the engine off and cool, look over the wiring and connector for burned or cracked insulation, and leave reading the sensor's output to a shop.
It is listed for a wide range of Volkswagen, BMW, Mercedes-Benz and Volvo models. As a Passat oxygen sensor, it fits the 1993-1995 Volkswagen Passat V6 2.8L and the 1995 Passat 4-cylinder 2.0L, and it also fits the 1993-1995 Golf 4-cylinder 2.0L. This listing is one sensor; the 1993-1995 Jetta 4-cylinder 2.0L takes one, and the count varies by vehicle. Open the Buyer's Guide tab to check your exact model and engine.
Fit and size
Build and materials
One oxygen sensor with its wiring harness, reusable Posi-Lock® connectors and pre-applied conductive anti-seize. A mounting bracket is not included.
Are these VW Jetta oxygen sensors right for a 1993-1995 Volkswagen Jetta 4-cylinder 2.0L?
Yes. Bosch 15736 is listed for the 1993-1995 Volkswagen Jetta 4-cylinder 2.0L and the 1994 Jetta V6 2.8L. For another model, use the Buyer's Guide tab.
Is this a VW Golf oxygen sensor for the 1993-1995 Volkswagen Golf 4-cylinder 2.0L?
Yes. Bosch 15736 is listed for the 1993-1995 Volkswagen Golf 4-cylinder 2.0L, and that engine takes one sensor.
How does a Bosch O2 sensor like this one connect to my existing wiring?
Posi-Lock connectors join this oxygen sensor to the existing harness without soldering, crimping or specialty tools. They can be reopened and reused if you need to adjust the wiring.
What thread size and hex does this oxygen sensor use?
This oxygen sensor has an M18 - 1.5 thread and a 22 mm hex. Its wiring measures 25.8 in from the sealing surface to the end of the connector.
Does the Bosch 15736 oxygen sensor come with anti-seize and a mounting bracket?
Bosch 15736 comes with its wiring harness, reusable Posi-Lock connectors and a sensor with pre-applied conductive anti-seize. A mounting bracket is not included.
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
