Centric Parts Brake Hydraulic Hose P/N:150.61073
Centric Parts 150.66045 front brake hydraulic hose for the 1989-2000 Chevrolet C2500 and other vehicles carries brake fluid to the caliper. The flexible hose lets the caliper move with the suspension and steering while holding brake fluid pressure.
Cracked or bulging rubber, a fluid leak at a fitting, a soft pedal or a pull to one side can mean this hose is worn, though a sticking caliper or a failing master cylinder can produce the pedal and pulling signs, so find the cause before replacing the hose.
This brake hydraulic hose fits the 1989-2000 Chevrolet C2500, the 1988-2000 Chevrolet C3500 and the 1989-2000 GMC C2500, along with other Chevrolet and GMC models. If your vehicle is not named here, find its year and model in the "Vehicles it fits" section. This listing is one hose; the 1989-2000 Chevrolet C2500 takes one per front position, and the other side of the front axle is normally done at the same time.
Fit and size
Build and materials
One brake hydraulic hose with a banjo bolt, one clip, a gasket or seal and one bracket. Mounting hardware, grommets and a shield are not included, so plan on new mounting hardware rather than reusing the old.
Product information is for general reference and may contain errors. See our Disclaimer.
Does the Centric Parts 150.66045 hose fit a 1989-2000 Chevrolet C2500?
Yes. Centric Parts 150.66045 fits the 1989-2000 Chevrolet C2500 at the front right or front left position. Other years and models are in the "Vehicles it fits" section.
Does this Centric Parts brake hydraulic hose come with a banjo bolt?
Yes. The hose comes with a banjo bolt, a clip, a gasket or seal and a bracket. Mounting hardware, grommets and a shield are not included.
What kind of end fittings does the 150.66045 brake hose have?
Centric Parts 150.66045 has a banjo fitting on end 1 and an inverted flare on end 2, both in metal. Its overall length is 540 mm (21.26 in).
How can I tell if this brake hydraulic hose is worn?
Cracked or bulging rubber, or fluid seeping at a fitting, can mean the hose is worn. A pull to one side while braking can also be a sign, and a shop can inspect the brake lines.
Is this hose Teflon lined or plain rubber?
No, it is not Teflon lined. The outer sleeve is EPDM rubber, and the hose is DOT approved.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.