Centric Parts Brake Hydraulic Hose P/N:150.65129
Keep pressurized brake fluid moving to the front right wheel with the Centric Parts brake hydraulic hose 150.61073, a direct-fit replacement for the listed 1996-2007 Ford Taurus and 1996-2005 Mercury Sable applications. The flexible hose links the vehicle's rigid brake line to the brake at that corner. It carries fluid under pressure every time you press the pedal and flexes as the wheel steers and the suspension moves.
Brake hoses age with heat, moisture and constant flexing. Signs this part may need replacing include fluid seepage at the hose or its fittings, visible cracking or bulging, a soft or spongy pedal, or the vehicle pulling to one side under braking. Diagnose the cause before replacing parts. Installing a new hose opens the hydraulic system, so the brakes must be bled afterward. Consult the vehicle service information for the correct fluid and for any fasteners or sealing washers the job calls for, including whether they may be reused.
Interchange: B916734 · HB81073 · 78364 · 18032916 · 18J1205 · 8734073 · H380419 · E15566078 · BH2496 · 380419 · 1F1Z2078AA · 3F1Z2078BA · 5F1Z2078A · F6DZ2078A · F7DZ2078AB · XF1Z2078BA · BH380419 · 2203174 · 223174 · BH133045 · BH138077 · F133045 · F138077
This part cross-references / interchanges with the following part numbers:
Does this Centric brake hose fit the 1996-2007 Ford Taurus and 1996-2005 Mercury Sable?
Yes. It is listed for the 1996-2007 Ford Taurus and 1996-2005 Mercury Sable in the front right position. Check the "Vehicles it fits" section to confirm your exact vehicle.
What does a brake hydraulic hose do?
It is the flexible link between the rigid brake line and the brake at the wheel. It carries pressurized brake fluid while letting the wheel move with steering and suspension travel.
What are signs a brake hose may need replacing?
Signs include fluid seepage at the hose or its fittings, cracking or bulging, a soft or spongy pedal, or pulling while braking. Diagnose the cause before replacing parts.
Which wheel position is this hose for?
Centric catalogs part 150.61073 for the front right position on the listed applications.
Do I need to bleed the brakes after installing it?
Yes. Replacing a brake hose opens the hydraulic system, so the brakes must be bled afterward. See the vehicle service information for the procedure, the correct fluid, and whether any fasteners or washers may be reused.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.