Front Left CV Axle for 2015-2020 Chevrolet Trax & More - A1 CARDONE 66-1590

$174.99

Vehicles this part fits

    Part number: 66-1590
    UPC: 884548300675
    Condition: New
    Weight: 14.30 LBS
    Item Package Quantity: 1
    $174.99
    Adding to cart… The item has been added

    Have questions?

    CARDONE New CV Axle Assembly P/N:66-1590
    CARDONE New CV Axle Assembly P/N:66-1590
    $174.99
    $174.99

    A1 CARDONE 66-1590 front left CV axle for the 2015-2020 Chevrolet Trax and other vehicles carries drive torque from the transaxle to the wheel. This new CV axle assembly includes its CV joints.

    • Shaft individually verified for straightness for vibration-free performance at all speeds
    • Neoprene boots with extra bellows, when needed, resist bellow stress and cracking, the leading cause of boot failure
    • Boot clamps pneumatically crimped to seal the boot to the housing
    • Grease that withstands high-temperature and high-torque demands
    • Precision-rolled splines and threads for proper fit in the hub, transmission and axle nut
    • Transmission seal diameter precision-machined after heat treatment for correct surface finish

    Quick facts

    • Part: A1 CARDONE 66-1590 CV axle
    • Also called: CV axle assembly
    • Fits: 2015-2020 Chevrolet Trax and other vehicles
    • Position: Front left
    • Material: Steel shaft, neoprene boots
    • Condition: New

    A clicking or snapping noise on hard turns, grease thrown onto the chassis or suspension from a torn boot, or vibration when accelerating can mean the axle is worn. Before replacing it, find the cause: with the engine off, look the boots over for tears or fresh grease, since a broken engine mount can also disturb the axle's alignment.

    Fits

    It fits the 2015-2020 Chevrolet Trax and the 2013-2020 Buick Encore, and each takes one axle on the front left. The part is built to O.E. form, fit and function. This listing is one axle for the front left; the front right is a separate part, and both are normally replaced together.

    Specifications

    Fit and size

    • Position: front left
    • Quantity per vehicle: 1
    • Shaft diameter: 25 mm (0.984 in)
    • Compressed length: 646 mm (25.433 in)
    • Inboard joint: splined, 34 splines
    • Outboard joint: splined, 25 splines
    • Axle nut: hex, M24x1.5 thread, 23 mm long, 36 mm socket

    Build and materials

    • Type: CV axle assembly with CV joints
    • Shaft material: steel
    • Boots: neoprene, 4 ribs, black
    • ABS tone ring: not included
    • Condition: New
    • Country of origin: China

    In the box

    One complete axle, one new axle nut and one instruction sheet.

    Installation notes

    • Remove and install one CV drive axle at a time.
    • Tighten the retaining nut with a torque wrench to the manufacturer's specifications, never with an impact wrench.
    • Install new transaxle seals when replacing axles.
    • Never let the axle hang unsupported, which can separate it and damage the inner joint.

    Interchange: 94522011 · 94531933 · 95090842

    Product information is for general reference and may contain errors. See our Disclaimer.

    This part cross-references / interchanges with the following part numbers:

    94522011, 94531933, 95090842

    Frequently Asked Questions

    Is this A1 CARDONE CV axle the right one for the 2013-2020 Buick Encore?

    Yes, A1 CARDONE 66-1590 is made for the front left of the 2013-2020 Buick Encore; the front right is a separate part.

    Do A1 CARDONE axles like this one come with a new axle nut?

    Yes, the box holds the complete axle, a new hex axle nut (M24x1.5 thread, 36 mm socket) and an instruction sheet; the ABS tone ring is not included.

    What are the shaft size and spline counts on this A1 CARDONE CV drive axle?

    A1 CARDONE 66-1590 has a 25 mm (0.984 in) shaft, 34 inboard splines and 25 outboard splines. Its compressed length is 646 mm (25.433 in).

    What can clicking when I turn hard mean on a front left CV axle?

    Clicking or snapping on hard turns, or a torn boot with grease on the chassis, can mean a worn joint. Have it inspected promptly instead of driving on it.

    Why might my ABS light stay on after I install a replacement CV axle?

    The sensor ring, sensor or wiring on or near the axle may have been damaged during installation, sending an erratic speed signal to the ABS module. A shop can diagnose it.

    Reviews

    No reviews yet — be the first to review this product.

    Write a Review