Front Right CV Axle for 2002-2009 Toyota Camry & More - A1 CARDONE 66-5247

$87.99
Sold out

Vehicles this part fits

    Part number: 66-5247
    UPC: 082617773263
    Condition: New
    Weight: 23.00 LBS
    Item Package Quantity: 1
    $87.99

    Out of stock

    Have questions?

    CARDONE New CV Axle Assembly P/N:66-5247
    CARDONE New CV Axle Assembly P/N:66-5247
    $87.99
    $87.99

    A1 CARDONE 66-5247 front right CV axle for the 2002-2009 Toyota Camry and other vehicles carries torque from the transmission to the wheel. Its design addresses the reasons original CV axles typically fail.

    • CV axle shafts individually verified for straightness, for vibration-free performance at all speeds
    • Neoprene boots with additional bellows, when needed, to resist bellow stress and cracking
    • New axle retaining nut supplied, since the original nut is likely worn or stripped
    • Boot clamps pneumatically crimped for a seal between the boot and housing
    • Grease that withstands high-temperature and high-torque demands
    • Precision-rolled splines for proper fit in the mating hub and transmission

    Quick facts

    • Part: A1 CARDONE 66-5247 CV axle
    • Also called: CV axle assembly
    • Fits: 2002-2009 Toyota Camry and other vehicles
    • Position: Front right
    • Material: Steel shaft, neoprene boots
    • Condition: New

    Clicking or snapping when you turn hard under throttle, a thump on acceleration, or grease around a torn boot can mean an axle is wearing out. Before buying, look over the boots and engine mounts with the engine off and cool; a split boot or a broken mount is worth ruling out first.

    Fits

    It fits the 2002-2009 Toyota Camry, the 2001-2007 Toyota Highlander and the 2004-2008 Toyota Solara. This listing is one CV axle assembly for the front right; each front wheel has its own axle, so the front left is ordered separately.

    Specifications

    Fit and size

    • Position: front right
    • Quantity per application: 1
    • Shaft diameter: 28 mm (1.102 in)
    • Compressed length: 966.79 mm (38.062 in)
    • Inboard joint: splined, 24 splines
    • Outboard joint: splined, 26 splines
    • Axle nut thread size: M22x1.5
    • Axle nut socket size: 30 mm (1.181 in)

    Build and materials

    • Shaft material: steel
    • Boot material: neoprene, 6 ribs
    • CV joints: included
    • Axle nut: hex, included
    • ABS tone ring: included, toothed, 48 teeth
    • Dynamic damper: attached
    • Condition: new
    • Country of origin: China

    In the box

    One complete CV axle with its axle nut, plus an instruction sheet.

    Installation notes

    • Tighten the axle retaining nut with a torque wrench to the vehicle manufacturer's specification; never use an impact wrench.
    • Remove and install one axle at a time.
    • Fit new transaxle seals to avoid leaks, and discard the old locking-style nut.
    • Use a press-type tool on a stuck outer stub shaft; never strike it with a hammer.

    Interchange: 4341006221 · 4341006231 · 4341006460 · 4341006570 · 4341006580 · 434100W061 · 434100W071 · 434100W081 · 434100W091 · 4341033290 · 4341048070 · 4341048071

    Product information is for general reference and may contain errors. See our Disclaimer.

    This part cross-references / interchanges with the following part numbers:

    4341006221, 4341006231, 4341006460, 4341006570, 4341006580, 434100W061, 434100W071, 434100W081, 434100W091, 4341033290, 4341048070, 4341048071

    Frequently Asked Questions

    Is this a CV axle replacement for the 2002-2009 Toyota Camry?

    Yes. A1 CARDONE 66-5247 is a front right CV axle for the 2002-2009 Toyota Camry. The front left side takes its own axle, ordered separately.

    Does the A1 CARDONE CV axle come with a new axle nut?

    Yes. A1 CARDONE 66-5247 includes a hex axle nut (M22x1.5, 30 mm socket) and an instruction sheet with the complete axle. The old locking-style nut should be discarded, not reused.

    Does the 66-5247 CV axle include an ABS tone ring?

    Yes. This axle has a toothed ABS tone ring with 48 teeth.

    What can loud clicking when I turn hard and accelerate mean on a CV axle?

    Clicking or snapping while cutting the wheel under throttle, or a thump and vibration on acceleration, can mean a worn joint. A shop can inspect the axle and its mounts.

    Can I use an impact wrench to tighten this axle's retaining nut?

    No. Use a torque wrench and tighten the retaining nut to the vehicle manufacturer's specification, not an impact wrench.

    Reviews

    No reviews yet — be the first to review this product.

    Write a Review