Front Right Brake Caliper for 2000-2001 Dodge Ram 1500 - A1 CARDONE 2C-4762A

$196.99

Vehicles this part fits

    Part number: 2C-4762A
    UPC: 884548289635
    Condition: New
    Weight: 18.00 LBS
    Item Package Quantity: 1
    $196.99
    Adding to cart… The item has been added

    Have questions?

    CARDONE New Disc Brake Caliper P/N:2C-4762A
    CARDONE New Disc Brake Caliper P/N:2C-4762A
    $196.99
    $196.99

    A1 CARDONE 2C-4762A front right brake caliper for the 2000-2001 Dodge Ram 1500 clamps the brake pads against the rotor to slow the wheel. This new disc brake caliper is a floating design and comes without pads.

    • Floating caliper with two phenolic pistons, each 53.85 mm (2.12 in) across
    • Cast iron body with a zinc-plated silver finish
    • Rust-resistant coating
    • Every unit is 100% tested

    Quick facts

    • Part: A1 CARDONE 2C-4762A brake caliper
    • Also called: disc brake caliper
    • Fits: 2000-2001 Dodge Ram 1500
    • Position: Front right
    • Material: Cast iron
    • Condition: New

    A pull to one side under braking, fluid at the caliper or uneven pad wear can mean a caliper is failing. A binding slide pin, a collapsed brake hose or a worn rotor can also be behind these signs, so find the cause before buying. Front calipers are normally replaced together as a pair, and this listing is one caliper for the front right.

    Fits

    This is a direct-fit replacement for the front right side of the 2000-2001 Dodge Ram 1500.

    Specifications

    Fit and size

    • Position: Front right
    • Quantity for this side: 1
    • Piston quantity: 2
    • Piston diameter: 53.85 mm (2.12 in)
    • Mounting hole diameter: 0.551 in
    • Bleeder thread size: 3/8x24
    • Inlet fitting: Banjo

    Build and materials

    • Caliper type: Floating
    • Casting material: Cast iron
    • Piston material: Phenolic
    • Finish: Zinc plated, silver, with a rust-resistant coating
    • Condition: New
    • Country of origin: Korea, Republic of

    In the box

    One caliper with its bracket, hardware kit, bleeder screw and instruction sheet. This listing holds one caliper for the front right, and that side takes one. Pads are not included, and neither are mounting bolts, so plan on new ones.

    Installation notes

    • Follow the included instruction sheet for the installation steps.
    • A silicone grease is used on floating caliper mounting pins.
    • Use new brake fluid from a sealed container, of the type the vehicle maker specifies; it is stamped on the master cylinder reservoir lid.

    Interchange: 5018236AA

    Product information is for general reference and may contain errors. See our Disclaimer.

    This part cross-references / interchanges with the following part numbers:

    5018236AA

    Frequently Asked Questions

    Is the A1 CARDONE 2C-4762A front right caliper the right one for a 2000-2001 Dodge Ram 1500?

    Yes, A1 CARDONE 2C-4762A fits the front right side of the 2000-2001 Dodge Ram 1500. The front left caliper is a separate part.

    Does this A1 CARDONE brake caliper come with a mounting bracket?

    Yes. It comes with the bracket, a hardware kit, a bleeder screw and an instruction sheet. Pads and mounting bolts are not included.

    Does this A1 CARDONE caliper use phenolic or steel pistons?

    This caliper has two phenolic pistons, each 53.85 mm (2.12 in) across. Swapping phenolic for steel pistons is not recommended; follow the vehicle maker's recommendation.

    Can a bad caliper make a vehicle pull to one side when braking?

    It can, if a caliper's slides or pins are binding on one side. A pull under braking is a brake-safety issue, so have a shop inspect it promptly.

    What grease goes on the floating caliper mounting pins?

    A silicone grease is used on floating caliper mounting pins. The A1 CARDONE 2C-4762A caliper includes an instruction sheet for the steps.

    Reviews

    No reviews yet — be the first to review this product.

    Write a Review