CARDONE Reman Mass Air Flow Sensor P/N:74-10087
CARDONE New 86-10087 mass air flow sensor for the 1994-1999 Volkswagen Jetta V6 2.8L and other vehicles measures the air entering the engine and sends that reading to the engine control management system.
A failing mass air flow sensor can show up as hesitation, stalling or poor fuel economy, though those symptoms have other possible sources too. With the engine off, look at the sensor element for damage or a burnt smell, and have the trouble codes scanned before you replace it.
The vehicles it fits include the 1994-1999 Volkswagen Jetta V6 2.8L, the 1995-1998 Volkswagen Golf V6 2.8L and the 1995-1997 Volkswagen Passat V6 2.8L, and each takes one sensor. O.E. fit and function is guaranteed on these vehicles. It works as a VW Jetta mass air flow sensor on the 1994-1999 V6 2.8L and as a VW Golf mass air flow sensor on the 1995-1998 V6 2.8L. If your Volkswagen is not named here, look up your year and engine in the "Vehicles it fits" section.
Fit and size
Build and materials
One mass air flow sensor and one instruction sheet. Mounting hardware, a mounting bracket and a wiring harness are not included, so plan on new mounting hardware, as the old pieces may not be reusable.
Interchange: 021906462 · 021906462A
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Is this the maf sensor for a 1994-1999 VW Jetta with the V6 2.8L?
Yes, CARDONE New 86-10087 is listed for the 1994-1999 Volkswagen Jetta V6 2.8L, which takes one. For a different Volkswagen, look up your year and engine in the "Vehicles it fits" section.
Does this VW Passat mass air flow sensor fit the 1995-1997 Volkswagen Passat V6 2.8L?
Yes. This mass air flow sensor is listed for the 1995-1997 Volkswagen Passat V6 2.8L, and the vehicle takes one.
Does the CARDONE 86-10087 come with a wiring harness or mounting bracket?
No. The CARDONE 86-10087 box holds the mass air flow sensor and an instruction sheet; mounting hardware, a mounting bracket and a wiring harness are not included.
What size are the inlet and outlet connections on this mass air flow sensor?
The inlet connection is 3.15 in (80.01 mm) and the outlet connection is 3.2 in (81.28 mm). The electrical connector is rectangular and male, with four pin terminals.
What usually goes wrong inside a mass air flow sensor?
Common failures are cracked circuit boards, burnt sensing elements, poor solder joints, deteriorated conformal coating and loose circuit board components.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.