CARDONE Reman Mass Air Flow Sensor P/N:74-10124
CARDONE New 86-10124 mass air flow sensor for the 2003-2006 BMW 325Ci 6-cylinder 2.5L and other vehicles measures the air entering the engine. It sends that reading to the engine control management system.
A failing mass air flow sensor can show up as hesitation, stalling or poor fuel economy. Before you replace the sensor, read the diagnostic trouble codes and look over the connector and intake hose for damage with the engine off, since a different fault may be behind the same symptoms.
The vehicles it fits include the 2004-2006 BMW X3 6-cylinder 2.5L and the 2003-2005 BMW 325i 6-cylinder 2.5L. Fitment calls for one sensor per vehicle, and this listing is one sensor. O.E. fit and function are guaranteed. To check your exact model and engine, open the "Vehicles it fits" section.
Fit and size
Build and materials
One mass air flow sensor and one instruction sheet. The mounting hardware, mounting bracket and wiring harness are not included; plan on new mounting hardware, since the old pieces may not be reusable.
Interchange: 13627513957 · 13627566984
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Is this the mass air flow sensor for a 2003-2005 BMW 325i 6-cylinder 2.5L?
Yes. CARDONE New 86-10124 fits the 2003-2005 BMW 325i 6-cylinder 2.5L. For another model or engine, open the "Vehicles it fits" section.
Is this mass air flow sensor for the 2004-2006 BMW X3 6-cylinder 2.5L?
Yes. CARDONE New 86-10124 fits the 2004-2006 BMW X3 6-cylinder 2.5L, and this listing is a single sensor.
Does the CARDONE 86-10124 mass air flow sensor come with a wiring harness or mounting hardware?
No. It comes with an instruction sheet, but the wiring harness, mounting bracket and mounting hardware are not included.
What size are the inlet and outlet connections on this mass air flow sensor?
The inlet connection is 80.26 mm (3.16 in) across and the outlet is 79.76 mm (3.14 in). The sensor has one rectangular male connector with 6 pin terminals.
How can I tell if this mass air flow sensor is going bad?
Hesitation, stalling or poor fuel economy can be signs of a failing sensor. With the engine off, look the sensor element over for damage or a burnt smell, and check for trouble codes with a scanner.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.