CARDONE New Power Steering Pump P/N:96-286
A1 CARDONE 96-282 power steering pump for the 1997-2001 Ford F-250 and other vehicles builds the hydraulic pressure that gives the steering its assist. This new A1 CARDONE power steering pump meets or exceeds O.E. performance.
A whine that never goes away, steering that feels heavy or fluid around the pump can mean the pump is wearing out. Before you replace the pump, rule out binding steering components and debris in the system, since a new pump may not solve either.
The vehicles it fits include the 1997-2003 Ford F-150, the 2001-2002 Ford Expedition and the 1997-2001 Ford F-250. The 2001-2002 Ford Expedition takes one pump. Open the "Vehicles it fits" section to check your exact model and engine.
Fit and size
Build and materials
One power steering pump, one sealing kit and one instruction sheet. The pulley, reservoir, reservoir cap, filter and mounting hardware are not included, so plan on new mounting hardware, since the old pieces may not be reusable.
Interchange: 2L3Z3A674AARM · 2L3Z3A674CARM · 2L3Z3A674CBRM · 7L3Z3A674DRM · F65Z3A674AA · F85Z3A674AA · F85Z3A674AARM · F85Z3A674ABRM
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Is this Ford F-150 power steering pump correct for the 1997-2003 model years?
Yes. A1 CARDONE 96-282 fits the 1997-2003 Ford F-150. Open the "Vehicles it fits" section to match your exact engine.
Will this Ford Expedition power steering pump work for the 2001-2002 model years?
Yes. A1 CARDONE 96-282 fits the 2001-2002 Ford Expedition, and that vehicle takes one pump.
Does the A1 CARDONE 96-282 come with a pulley or reservoir?
No. The box holds the pump, a sealing kit and an instruction sheet. The pulley, reservoir, reservoir cap, filter and mounting hardware are not included.
What size are the inlet and outlet on this power steering pump?
The inlet is a barb with a 0.691 in diameter, and the outlet is threaded with a 16x1.5 thread size. The pump has one inlet and one outlet.
My old pulley fits loosely on the replacement pump shaft. What now?
A loose fit can mean the pulley bore was enlarged, for example when a mushroomed shaft was pulled through it. That pulley must be replaced; this pump comes without a pulley.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.