Remanufactured Engine Control Module (Ecm) for 2001 Dodge Grand Caravan & More - A1 CARDONE 79-7401V

$287.99

Vehicles this part fits

    Part number: 79-7401V
    UPC: 082617790475
    Weight: 3.78 LBS
    Item Package Quantity: 1
    $287.99
    Adding to cart… The item has been added

    Have questions?

    CARDONE Reman Engine Control Module (ECM) P/N:79-7401V
    CARDONE Reman Engine Control Module (ECM) P/N:79-7401V
    $287.99
    $287.99

    A1 CARDONE 79-7401V engine control module (ecm) for the 2001 Dodge Grand Caravan V6 3.3L and other vehicles is a remanufactured computer that controls the engine. Each unit is 100% computer tested.

    • Reverse engineering of the original failure lets engineers find and correct original design weaknesses
    • Tested with automated computer equipment or bench-tested, depending on application
    • All critical components are re-soldered or replaced, which gives solid electrical connections and helps prevent intermittent failures
    • On-car vehicle validation tests durability and performance
    • Remanufacturing cuts the energy and raw material needed to make a new part by 80%

    Quick facts

    • Part: A1 CARDONE 79-7401V engine control module (ecm)
    • Fits: the 2001 Dodge Grand Caravan V6 3.3L and other vehicles
    • Condition: Remanufactured

    A failing module can show up as a check engine light that stays on after a reset, an engine that shuts off for no reason or intermittent starting problems. These signs alone do not prove the module is at fault, since poor grounds can cause them too. Each engine takes one module.

    Fits

    The 2001 Dodge Grand Caravan V6 3.3L, the 2001 Chrysler Town & Country V6 3.3L and the 2001 Dodge Caravan V6 3.3L are among the vehicles this module fits. If your vehicle is not named here, look for it in the "Vehicles it fits" section.

    Specifications

    Fit and size

    • Quantity per vehicle: 1
    • Connectors: 2, rectangular, female
    • Terminals: 80 pin terminals, male
    • Mounting holes: 3
    • Length: 9.8 in
    • Width: 7.6 in (193.04 mm)
    • Height: 2.1 in

    Build and materials

    • Condition: Remanufactured
    • Grade: Standard replacement
    • Flashable: Yes
    • Removable PROM: No
    • Country of origin: Mexico

    In the box

    One engine control module and one instruction sheet. Mounting hardware is not included, so plan on new hardware, since old fasteners may not be reusable.

    Installation notes

    • Chrysler models 1996 and newer need VIN programming.
    • The module should be properly flash programmed for the vehicle.
    • See the included instruction sheet for the steps.

    Product information is for general reference and may contain errors. See our Disclaimer.

    Frequently Asked Questions

    Does the A1 CARDONE ecm fit the 2001 Chrysler Town & Country V6 3.3L?

    Yes. The A1 CARDONE 79-7401V fits the 2001 Chrysler Town & Country V6 3.3L, and also the 2001 Dodge Caravan V6 3.3L.

    Yes. The A1 CARDONE 79-7401V fits the 2001 Chrysler Town & Country V6 3.3L, and also the 2001 Dodge Caravan V6 3.3L.

    What comes with the remanufactured 79-7401V module, and are mounting bolts included?

    The A1 CARDONE 79-7401V comes with the module and an instruction sheet. Mounting hardware is not included, so plan on new hardware.

    The A1 CARDONE 79-7401V comes with the module and an instruction sheet. Mounting hardware is not included, so plan on new hardware.

    What comes with the remanufactured 79-7401V module, and are mounting bolts included?

    The A1 CARDONE 79-7401V comes with the module and an instruction sheet. Mounting hardware is not included, so plan on new hardware.

    The A1 CARDONE 79-7401V comes with the module and an instruction sheet. Mounting hardware is not included, so plan on new hardware.

    How many connectors and terminals does this engine control module have?

    This module has two rectangular connectors and 80 pin terminals. The connectors are female and the terminals are male.

    This module has two rectangular connectors and 80 pin terminals. The connectors are female and the terminals are male.

    How many connectors and terminals does this engine control module have?

    This module has two rectangular connectors and 80 pin terminals. The connectors are female and the terminals are male.

    This module has two rectangular connectors and 80 pin terminals. The connectors are female and the terminals are male.

    Does the 79-7401V need VIN programming after it is installed?

    Yes, when it goes into a Chrysler model from 1996 or newer. The module also needs to be flash programmed correctly for the vehicle.

    Yes, when it goes into a Chrysler model from 1996 or newer. The module also needs to be flash programmed correctly for the vehicle.

    Does the 79-7401V need VIN programming after it is installed?

    Yes, when it goes into a Chrysler model from 1996 or newer. The module also needs to be flash programmed correctly for the vehicle.

    Yes, when it goes into a Chrysler model from 1996 or newer. The module also needs to be flash programmed correctly for the vehicle.

    What is the difference between this ECM and a PCM?

    ECM stands for Electronic Control Module and PCM for Powertrain Control Module. Both control the engine, but a PCM also controls the transmission.

    ECM stands for Electronic Control Module and PCM for Powertrain Control Module. Both control the engine, but a PCM also controls the transmission.

    What is the difference between this ECM and a PCM?

    ECM stands for Electronic Control Module and PCM for Powertrain Control Module. Both control the engine, but a PCM also controls the transmission.

    ECM stands for Electronic Control Module and PCM for Powertrain Control Module. Both control the engine, but a PCM also controls the transmission.

    Frequently Asked Questions

    Does the A1 CARDONE ecm fit the 2001 Chrysler Town & Country V6 3.3L?

    Yes. The A1 CARDONE 79-7401V fits the 2001 Chrysler Town & Country V6 3.3L, and also the 2001 Dodge Caravan V6 3.3L.

    Yes. The A1 CARDONE 79-7401V fits the 2001 Chrysler Town & Country V6 3.3L, and also the 2001 Dodge Caravan V6 3.3L.

    What comes with the remanufactured 79-7401V module, and are mounting bolts included?

    The A1 CARDONE 79-7401V comes with the module and an instruction sheet. Mounting hardware is not included, so plan on new hardware.

    The A1 CARDONE 79-7401V comes with the module and an instruction sheet. Mounting hardware is not included, so plan on new hardware.

    What comes with the remanufactured 79-7401V module, and are mounting bolts included?

    The A1 CARDONE 79-7401V comes with the module and an instruction sheet. Mounting hardware is not included, so plan on new hardware.

    The A1 CARDONE 79-7401V comes with the module and an instruction sheet. Mounting hardware is not included, so plan on new hardware.

    How many connectors and terminals does this engine control module have?

    This module has two rectangular connectors and 80 pin terminals. The connectors are female and the terminals are male.

    This module has two rectangular connectors and 80 pin terminals. The connectors are female and the terminals are male.

    How many connectors and terminals does this engine control module have?

    This module has two rectangular connectors and 80 pin terminals. The connectors are female and the terminals are male.

    This module has two rectangular connectors and 80 pin terminals. The connectors are female and the terminals are male.

    Does the 79-7401V need VIN programming after it is installed?

    Yes, when it goes into a Chrysler model from 1996 or newer. The module also needs to be flash programmed correctly for the vehicle.

    Yes, when it goes into a Chrysler model from 1996 or newer. The module also needs to be flash programmed correctly for the vehicle.

    Does the 79-7401V need VIN programming after it is installed?

    Yes, when it goes into a Chrysler model from 1996 or newer. The module also needs to be flash programmed correctly for the vehicle.

    Yes, when it goes into a Chrysler model from 1996 or newer. The module also needs to be flash programmed correctly for the vehicle.

    What is the difference between this ECM and a PCM?

    ECM stands for Electronic Control Module and PCM for Powertrain Control Module. Both control the engine, but a PCM also controls the transmission.

    ECM stands for Electronic Control Module and PCM for Powertrain Control Module. Both control the engine, but a PCM also controls the transmission.

    What is the difference between this ECM and a PCM?

    ECM stands for Electronic Control Module and PCM for Powertrain Control Module. Both control the engine, but a PCM also controls the transmission.

    ECM stands for Electronic Control Module and PCM for Powertrain Control Module. Both control the engine, but a PCM also controls the transmission.

    Reviews

    No reviews yet — be the first to review this product.

    Write a Review