A1 CARDONE 79-6434V engine control module (ecm) for the 2005 Chrysler 300 V6 3.5L and other vehicles is a remanufactured unit that controls the engine. Reverse engineering shows how and why the original unit failed, and the engineers correct the weak points in the design.
- Critical components are re-soldered or replaced during remanufacturing
- Re-soldering helps prevent intermittent failures and leads to longer product life
- Each unit is 100% computer tested, with automated computer equipment or a bench test depending on the application
- On-car vehicle validation tests durability and performance
- Remanufacturing reduces the energy and raw material needed to make a new part by 80%
Quick facts
- Part: A1 CARDONE 79-6434V engine control module (ecm)
- Fits: 2005 Chrysler 300 V6 3.5L and other vehicles
- Condition: Remanufactured
A check engine light that stays on after a reset, an engine that shuts off for no reason or intermittent starting can mean this module is failing, though poor grounds and power, a bad wiring harness or short-circuited solenoids and relays can lie behind them too, so rule those out first.
Fits
It is a direct-fit replacement for the 2005 Chrysler 300 V6 3.5L and the 2005 Dodge Magnum V6 3.5L; each takes one module.
Specifications
Fit and size
- Quantity per vehicle: 1
- Terminal quantity: 152
- Connector quantity: 4
- Mounting hole quantity: 3
- Length: 5.94 in
- Width: 8.95 in (227.33 mm)
- Height: 2.1 in
Build and materials
- Condition: Remanufactured
- Grade: Standard replacement
- Terminals: male pin
- Connectors: female, rectangle shape
- Flashable: Yes
- Removable PROM: No
- Country of origin: Mexico
In the box
One module and one instruction sheet. Mounting hardware is not included, so plan on new fasteners.
Installation notes
- Chrysler models 1996 and newer need VIN programming.
- Make sure the module is flash programmed for the vehicle.
- Refer to the instruction sheet for the steps.
Frequently Asked Questions
Is this A1 CARDONE ecm the right module for the 2005 Dodge Magnum V6 3.5L?
Yes. A1 CARDONE 79-6434V is a direct-fit replacement for the 2005 Dodge Magnum V6 3.5L, and it also fits the 2005 Chrysler 300 V6 3.5L.
Yes. A1 CARDONE 79-6434V is a direct-fit replacement for the 2005 Dodge Magnum V6 3.5L, and it also fits the 2005 Chrysler 300 V6 3.5L.
Which module is A1 CARDONE 79-6434V for the 2005 Chrysler 300 V6 3.5L: an ECM or a power control module?
A1 CARDONE 79-6434V is an engine control module for the 2005 Chrysler 300 V6 3.5L. An ECM controls the engine, while a PCM also controls the transmission.
A1 CARDONE 79-6434V is an engine control module for the 2005 Chrysler 300 V6 3.5L. An ECM controls the engine, while a PCM also controls the transmission.
Which module is A1 CARDONE 79-6434V for the 2005 Chrysler 300 V6 3.5L: an ECM or a power control module?
A1 CARDONE 79-6434V is an engine control module for the 2005 Chrysler 300 V6 3.5L. An ECM controls the engine, while a PCM also controls the transmission.
A1 CARDONE 79-6434V is an engine control module for the 2005 Chrysler 300 V6 3.5L. An ECM controls the engine, while a PCM also controls the transmission.
Does this engine control module come with mounting hardware?
No. The box holds the module and an instruction sheet, and mounting hardware is not included.
No. The box holds the module and an instruction sheet, and mounting hardware is not included.
Does this engine control module come with mounting hardware?
No. The box holds the module and an instruction sheet, and mounting hardware is not included.
No. The box holds the module and an instruction sheet, and mounting hardware is not included.
Can this remanufactured engine control module be flash programmed?
Yes, this module is flashable and has no removable PROM. VIN programming is needed on Chrysler models from 1996 on.
Yes, this module is flashable and has no removable PROM. VIN programming is needed on Chrysler models from 1996 on.
Can this remanufactured engine control module be flash programmed?
Yes, this module is flashable and has no removable PROM. VIN programming is needed on Chrysler models from 1996 on.
Yes, this module is flashable and has no removable PROM. VIN programming is needed on Chrysler models from 1996 on.
How many pins and connectors does this engine control module have?
A1 CARDONE 79-6434V has 152 male pin terminals and 4 female rectangle connectors. It also has 3 mounting holes.
A1 CARDONE 79-6434V has 152 male pin terminals and 4 female rectangle connectors. It also has 3 mounting holes.
How many pins and connectors does this engine control module have?
A1 CARDONE 79-6434V has 152 male pin terminals and 4 female rectangle connectors. It also has 3 mounting holes.
A1 CARDONE 79-6434V has 152 male pin terminals and 4 female rectangle connectors. It also has 3 mounting holes.
Frequently Asked Questions
Is this A1 CARDONE ecm the right module for the 2005 Dodge Magnum V6 3.5L?
Yes. A1 CARDONE 79-6434V is a direct-fit replacement for the 2005 Dodge Magnum V6 3.5L, and it also fits the 2005 Chrysler 300 V6 3.5L.
Yes. A1 CARDONE 79-6434V is a direct-fit replacement for the 2005 Dodge Magnum V6 3.5L, and it also fits the 2005 Chrysler 300 V6 3.5L.
Which module is A1 CARDONE 79-6434V for the 2005 Chrysler 300 V6 3.5L: an ECM or a power control module?
A1 CARDONE 79-6434V is an engine control module for the 2005 Chrysler 300 V6 3.5L. An ECM controls the engine, while a PCM also controls the transmission.
A1 CARDONE 79-6434V is an engine control module for the 2005 Chrysler 300 V6 3.5L. An ECM controls the engine, while a PCM also controls the transmission.
Which module is A1 CARDONE 79-6434V for the 2005 Chrysler 300 V6 3.5L: an ECM or a power control module?
A1 CARDONE 79-6434V is an engine control module for the 2005 Chrysler 300 V6 3.5L. An ECM controls the engine, while a PCM also controls the transmission.
A1 CARDONE 79-6434V is an engine control module for the 2005 Chrysler 300 V6 3.5L. An ECM controls the engine, while a PCM also controls the transmission.
Does this engine control module come with mounting hardware?
No. The box holds the module and an instruction sheet, and mounting hardware is not included.
No. The box holds the module and an instruction sheet, and mounting hardware is not included.
Does this engine control module come with mounting hardware?
No. The box holds the module and an instruction sheet, and mounting hardware is not included.
No. The box holds the module and an instruction sheet, and mounting hardware is not included.
Can this remanufactured engine control module be flash programmed?
Yes, this module is flashable and has no removable PROM. VIN programming is needed on Chrysler models from 1996 on.
Yes, this module is flashable and has no removable PROM. VIN programming is needed on Chrysler models from 1996 on.
Can this remanufactured engine control module be flash programmed?
Yes, this module is flashable and has no removable PROM. VIN programming is needed on Chrysler models from 1996 on.
Yes, this module is flashable and has no removable PROM. VIN programming is needed on Chrysler models from 1996 on.
How many pins and connectors does this engine control module have?
A1 CARDONE 79-6434V has 152 male pin terminals and 4 female rectangle connectors. It also has 3 mounting holes.
A1 CARDONE 79-6434V has 152 male pin terminals and 4 female rectangle connectors. It also has 3 mounting holes.
How many pins and connectors does this engine control module have?
A1 CARDONE 79-6434V has 152 male pin terminals and 4 female rectangle connectors. It also has 3 mounting holes.
A1 CARDONE 79-6434V has 152 male pin terminals and 4 female rectangle connectors. It also has 3 mounting holes.
