CARDONE Reman Mass Air Flow Sensor P/N:74-50047
A1 CARDONE 74-10020 mass air flow sensor for the 1998-1999 Volkswagen Passat 4-cylinder 1.8L and other vehicles measures the air entering the engine and passes that reading to the engine control system. This remanufactured sensor tracks O.E. output curves and holds spec tolerances so the readings stay accurate.
Hesitation, stalling, poor fuel economy or poor engine performance can mean the mass air flow sensor is failing, though a cracked intake hose or a dirty air filter can be behind the same signs. Looking the sensor element over for damage or a burnt smell is a start.
The sensor is listed for a wide range of Volkswagen and Audi models, and the 1998-1999 Volkswagen Passat 4-cylinder 1.8L is one of them. It is also a VW Jetta mass air flow sensor for 1993-1998 models with the 4-cylinder 2.0L and a VW Golf mass air flow sensor for 1993-1998 models with that same engine; each takes one.
Fit and size
Build and materials
One mass air flow sensor and one instruction sheet. Mounting hardware, a mounting bracket and a wiring harness are not included, so plan on new mounting hardware, since the old pieces may not be reusable.
Interchange: 037906461C · 058133471A · 0280217103 · 037906461A
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Is this the maf sensor for a 1993-1998 VW Jetta 4-cylinder 2.0L?
Yes. A1 CARDONE 74-10020 is listed for the 1993-1998 Volkswagen Jetta 4-cylinder 2.0L. For any other car, look it up in the "Vehicles it fits" section on this page.
Is this the VW Passat mass air flow sensor for 1998-1999 cars with the 4-cylinder 1.8L?
Yes. A1 CARDONE 74-10020 is listed for the 1998-1999 Volkswagen Passat 4-cylinder 1.8L, and that car takes one sensor.
Does the A1 CARDONE mass air flow sensor come with a wiring harness?
No. The box holds one mass air flow sensor and an instruction sheet. The mounting hardware, mounting bracket and wiring harness are not included.
What size are the inlet and outlet connections on this mass air flow sensor?
The inlet connection diameter is 91.44 mm (3.6 in) and the outlet connection diameter is 83.3 mm (3.4 in).
What can go bad inside a mass air flow sensor?
Cracked circuit boards, burnt sensing elements, poor solder joints, deteriorated conformal coating or loose board components can fail. This remanufactured unit has 100% of its critical components re-soldered.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.