CARDONE Reman Mass Air Flow Sensor P/N:74-50033
A1 CARDONE 74-10043 mass air flow sensor for the 1997-1998 BMW Z3 6-cylinder 2.8L, the 1998-2001 Z3 6-cylinder 3.2L and other vehicles measures the air flowing into the engine and sends that reading to the engine control system. This remanufactured unit tracks O.E. output curves and holds spec tolerances, so scan tool readings stay accurate.
Hesitation, stalling, poor fuel economy or poor engine performance can all come from a malfunctioning mass air flow sensor. Before you replace it, rule out other causes: look over the sensing element for damage or a burnt smell and scan for stored trouble codes.
The 1997-1998 BMW Z3 6-cylinder 2.8L, the 1998-2001 Z3 6-cylinder 3.2L, the 1998-1999 BMW 323i 6-cylinder 2.5L and the 1998-1999 BMW 323is 6-cylinder 2.5L all take this sensor, and so do other BMW models. This listing is one sensor, which is all a 1998-1999 BMW 323is 6-cylinder 2.5L needs. If your BMW is not named here, look up its year and engine in the "Vehicles it fits" section.
Fit and size
Build and materials
One mass air flow sensor and one instruction sheet. Mounting hardware, a mounting bracket and a wiring harness are not included.
Interchange: 13621703275 · 13621707650
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Is this a BMW 323i mass air flow sensor for the 1998-1999 6-cylinder 2.5L?
Yes. A1 CARDONE 74-10043 fits the 1998-1999 BMW 323i 6-cylinder 2.5L and takes one per vehicle; the "Vehicles it fits" section covers other BMW years and engines.
Does the 74-10043 come with a wiring harness or mounting bracket?
No. A1 CARDONE 74-10043 comes as one mass air flow sensor and an instruction sheet; the wiring harness, mounting bracket and mounting hardware are not included.
How many pins does the connector on this mass air flow sensor have?
The sensor has one round male connector with four male pin terminals. It mounts with a hose clamp and has two mounting holes.
What goes wrong inside a failing mass air flow sensor?
Cracked circuit boards, burnt sensing elements, poor solder joints, deteriorated conformal coating and loose circuit board components are the common causes. A scan for trouble codes can help narrow it down.
How is this remanufactured mass air flow sensor tested?
Each unit is tested 100% on automated computer test equipment. On-car vehicle validation routines also confirm form, fit, durability and performance.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.