CARDONE Reman Mass Air Flow Sensor P/N:74-9511
A1 CARDONE 74-10045 mass air flow sensor for the 1998-2001 Nissan Altima 4-cylinder 2.4L and other vehicles measures incoming air for the engine control system. This remanufactured unit tracks O.E. output curves and holds spec tolerances so scan tool readings stay accurate.
On the 1998-2001 Nissan Altima 4-cylinder 2.4L, a failing air flow sensor can cause hesitation, stalling, poor fuel economy or poor engine performance. Before you replace it, rule out other causes of those symptoms by scanning for trouble codes and, with the engine off and cool, looking over the sensor element for damage or a burnt smell.
It works as a Nissan Altima mass air flow sensor replacement for the 1998-2001 4-cylinder 2.4L, and it also fits the 1994-1998 Nissan 240SX 4-cylinder 2.4L.
Fit and size
Build and materials
One mass air flow sensor and one instruction sheet; the engine needs one sensor. Mounting hardware, a mounting bracket and a wiring harness are not included, and the old fasteners may not be reusable, so plan on new ones.
Interchange: 2268070F00 · 226809E005
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Is this a MAF sensor for the 1998-2001 Nissan Altima 4-cylinder 2.4L?
Yes. A1 CARDONE 74-10045 is a remanufactured mass air flow sensor for the 1998-2001 Nissan Altima 4-cylinder 2.4L, and it fits the 1994-1998 Nissan 240SX 4-cylinder 2.4L too.
Is 74-10045 a 240SX mass air flow sensor for the 1994-1998 model with the 4-cylinder 2.4L?
Yes. A1 CARDONE 74-10045 fits the 1994-1998 Nissan 240SX 4-cylinder 2.4L.
Does the A1 CARDONE mass air flow sensor come with a wiring harness or mounting bracket?
No. A1 CARDONE 74-10045 comes with the sensor and an instruction sheet only; the wiring harness, mounting bracket and mounting hardware are not included.
What connector does this mass air flow sensor use?
The connector is one rectangular male connector with three male pin terminals, and the outlet connection measures 68.6 mm (2.8 in) in diameter.
What commonly goes wrong inside a MAF sensor like this one?
Common failures are cracked circuit boards, burnt sensing elements, poor solder joints, deteriorated conformal coating or loose circuit board components.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.