CARDONE Reman Mass Air Flow Sensor P/N:74-50048
A1 CARDONE 74-10053 mass air flow sensor for the 2001-2002 Kia Rio 4-cylinder 1.5L and the 2003-2005 Rio 4-cylinder 1.6L measures the air entering the engine and sends that reading to the engine control system. This is a remanufactured unit, and the process reduces the energy and raw material needed to make a new part by 80%.
A malfunctioning mass air flow sensor can cause hesitation, stalling, poor fuel economy or poor engine performance, though a different fault could produce those symptoms too. With the engine off and cool, look over the sensor and its housing for damage or a burnt smell, and have a shop read the trouble codes before you replace it.
This mass air flow sensor fits the 2001-2002 Kia Rio 4-cylinder 1.5L and the 2003-2005 Rio 4-cylinder 1.6L. Each of these takes one sensor.
Fit and size
Build and materials
One mass air flow sensor and one instruction sheet. Mounting hardware, a mounting bracket and a wiring harness are not included, so plan on new mounting hardware.
Interchange: 0K32A12210 · 0K32A13210
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Is this the right air flow sensor for the 2001-2002 Kia Rio 4-cylinder 1.5L?
Yes. A1 CARDONE 74-10053 fits the 2001-2002 Kia Rio 4-cylinder 1.5L and the 2003-2005 Rio 4-cylinder 1.6L, and each takes one sensor.
Does the A1 CARDONE 74-10053 come with a wiring harness or mounting bracket?
No. The box holds the mass air flow sensor and an instruction sheet. Mounting hardware, a mounting bracket and a wiring harness are not included.
What size are the inlet and outlet connections on this mass air flow sensor?
The inlet connection is 2.8 in (71.12 mm) and the outlet is 2.8 in (68.6 mm). The connector is a rectangular male with 3 blade terminals.
How is this remanufactured mass air flow sensor tested?
Every module is 100% tested with automated computer test equipment. On-car vehicle validation routines also check form, fit, durability and performance.
What goes bad inside a mass air flow sensor?
Common causes are cracked circuit boards, burnt sensing elements, poor solder joints, deteriorated conformal coating or loose circuit board components. This remanufactured unit has all critical components re-soldered.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.