CARDONE Reman Mass Air Flow Sensor P/N:74-50047
A1 CARDONE 74-10074 mass air flow sensor for the 2002-2003 Nissan Altima 4-cylinder 2.5L or V6 3.5L and other vehicles measures the air entering the engine and reports it to the engine control system. This remanufactured sensor tracks O.E. output curves and holds specification tolerances for accurate scan tool readings.
Hesitation, stalling, poor fuel economy or poor engine performance can mean this sensor is worn, though a vacuum leak or a dirty air filter can be behind the same symptoms.
This is a mass air flow sensor for the 2002-2003 Nissan Sentra 4-cylinder 2.5L and the 2002-2003 Nissan Altima 4-cylinder 2.5L or V6 3.5L, and each of them takes one.
Fit and size
Build and materials
One mass air flow sensor and one instruction sheet. Mounting hardware, a mounting bracket and a wiring harness are not included, so plan on new mounting hardware rather than reusing the old pieces.
Interchange: 226808J000
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Is this maf sensor right for the 2002-2003 Nissan Altima 4-cylinder 2.5L or V6 3.5L?
Yes. A1 CARDONE 74-10074 fits the 2002-2003 Nissan Altima with the 4-cylinder 2.5L or the V6 3.5L, and each of those engines takes one sensor.
Does this air flow sensor for the 2002-2003 Nissan Altima 4-cylinder 2.5L or V6 3.5L include a wiring harness?
No. A1 CARDONE 74-10074 comes with an instruction sheet only; the mounting hardware, mounting bracket and wiring harness are not included.
Is the A1 CARDONE mass air flow sensor remanufactured?
Yes. A1 CARDONE 74-10074 is a remanufactured unit. All of its critical components are 100% re-soldered, and every module is tested on automated computer equipment.
How can I tell if this mass air flow sensor's element is damaged?
With the engine off and cool, look at the sensor element for damage or a burnt smell, and have a scanner read any trouble codes. A shop can test it further.
What is the outlet connection diameter on this mass air flow sensor?
The outlet connection is 75.95 mm (3.1 in) across. The sensor mounts with a bolt-on and hose clamp arrangement and has four mounting holes.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.