CARDONE Reman Mass Air Flow Sensor P/N:74-50047
A1 CARDONE 74-10137 mass air flow sensor for the 2004-2007 Volvo S60 5-cylinder 2.5L, the 2005-2009 S60 5-cylinder 2.4L and other vehicles measures the air entering the engine. This remanufactured sensor tracks O.E. output curves and holds spec tolerances for accurate feedback to the engine control management system and correct scan tool readings.
A failing mass air flow sensor can show up as hesitation, stalling or poor fuel economy. A vacuum leak, a clogged air filter or a split intake air duct can be behind those troubles as well, so pin down the cause before you replace the sensor.
This remanufactured original equipment part is a direct-fit mass air flow sensor replacement for the 2004-2007 Volvo S60 5-cylinder 2.5L and the 2005-2009 S60 5-cylinder 2.4L. The cars it fits also include the 2004-2007 Volvo V70 5-cylinder 2.5L, the 2005 V70 5-cylinder 2.4L, the 1999-2002 Volvo S80 6-cylinder 2.8L and the 2002-2005 S80 6-cylinder 2.9L, and each one takes a single sensor. Own a different Volvo? Find your model and engine in the "Vehicles it fits" section.
Fit and size
Build and materials
One mass air flow sensor and an instruction sheet. The wiring harness, mounting hardware and mounting bracket are not included, so plan on new mounting hardware.
Interchange: 8670113 · 86701130 · 86701133 · 8670114 · 9470776
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Is this the right MAF sensor for a 2004-2007 Volvo S60 5-cylinder 2.5L or a 2005-2009 S60 5-cylinder 2.4L?
Yes. The A1 CARDONE 74-10137 fits the 2004-2007 Volvo S60 5-cylinder 2.5L and the 2005-2009 S60 5-cylinder 2.4L, and each takes one sensor.
Will this mass air flow sensor fit a 2004-2007 Volvo V70 5-cylinder 2.5L?
Yes. The A1 CARDONE 74-10137 fits the 2004-2007 Volvo V70 5-cylinder 2.5L as well as the 2005 V70 5-cylinder 2.4L.
Does the CARDONE 74-10137 come with a wiring harness or mounting bolts?
No. The box holds the mass air flow sensor and an instruction sheet; the wiring harness, mounting hardware and mounting bracket are not included.
What size is the inlet on this mass air flow sensor?
This mass air flow sensor has a 3.4 in (86.36 mm) inlet connection and one rectangular male connector with 5 pin terminals.
How can I check the sensing element on a mass air flow sensor?
With the engine off and cool, look at the sensor element for damage or a burnt smell, then read any diagnostic trouble codes with a scan tool.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.