CARDONE Reman Mass Air Flow Sensor P/N:74-50047
A1 CARDONE 74-60018 mass air flow sensor for the 1997-1998 Mitsubishi Montero Sport V6 3.0L measures the air entering the engine and sends feedback to the engine control system. This remanufactured A1 CARDONE mass air flow sensor tracks O.E. output curves and holds spec tolerances for accurate scan tool readings.
Hesitation, stalling, poor fuel economy or poor engine performance can come from a failing mass air flow sensor. Before you replace it, rule out other causes of the same symptoms by looking the sensor element over for damage or a burnt smell with the engine off, and by reading stored trouble codes with a scanner.
This mass air flow sensor fits the 1997-1998 Mitsubishi Montero Sport V6 3.0L, which takes one.
Fit and size
Build and materials
One mass air flow sensor and one instruction sheet. Mounting hardware, a mounting bracket and a wiring harness are not included, so plan on new hardware, as the old pieces may not be reusable.
Interchange: MD334011
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Is the A1 CARDONE 74-60018 the right mass air flow sensor for the 1997-1998 Mitsubishi Montero Sport V6 3.0L?
Yes. A1 CARDONE 74-60018 is a direct-fit replacement for the 1997-1998 Mitsubishi Montero Sport V6 3.0L, which takes one sensor.
Yes. A1 CARDONE 74-60018 is listed for the 1997-1998 Mitsubishi Montero Sport V6 3.0L, and that vehicle takes one sensor.
Does this remanufactured sensor come with a mounting bracket or wiring harness?
No. The box holds one mass air flow sensor and an instruction sheet. Mounting hardware, the mounting bracket and the wiring harness are not included.
No. The box holds one mass air flow sensor and an instruction sheet. The wiring harness, mounting bracket and mounting hardware are not included.
Does this mass air flow sensor come with a wiring harness or mounting bracket?
No. The box holds one mass air flow sensor and an instruction sheet. Mounting hardware, the mounting bracket and the wiring harness are not included.
No. The box holds one mass air flow sensor and an instruction sheet. The wiring harness, mounting bracket and mounting hardware are not included.
What size is the outlet connection on this mass air flow sensor?
On the A1 CARDONE 74-60018, the outlet connection diameter is 78.4 mm (3.2 in). The connector is rectangular with 7 male pin terminals.
A1 CARDONE 74-60018 has one rectangular male connector with 7 male pin terminals and a 78.4 mm (3.2 in) outlet connection diameter. It mounts bolt-on with a hose clamp.
What connector does the 74-60018 use?
On the A1 CARDONE 74-60018, the outlet connection diameter is 78.4 mm (3.2 in). The connector is rectangular with 7 male pin terminals.
A1 CARDONE 74-60018 has one rectangular male connector with 7 male pin terminals and a 78.4 mm (3.2 in) outlet connection diameter. It mounts bolt-on with a hose clamp.
Could hesitation or stalling be coming from the mass air flow sensor?
It can be. A malfunctioning sensor can cause hesitation, stalling, poor fuel economy or poor engine performance, and a shop can read trouble codes with a scanner.
Common failures are cracked circuit boards, burnt sensing elements, poor solder joints, deteriorated conformal coating or loose printed circuit board components.
What goes bad inside a mass air flow sensor?
It can be. A malfunctioning sensor can cause hesitation, stalling, poor fuel economy or poor engine performance, and a shop can read trouble codes with a scanner.
Common failures are cracked circuit boards, burnt sensing elements, poor solder joints, deteriorated conformal coating or loose printed circuit board components.
How is this remanufactured mass air flow sensor tested?
Critical components are 100% re-soldered, and each unit is 100% tested with automated computer test equipment. On-car validation routines also check form, durability and performance.
Yes. MD334011 is listed as an interchange number for the A1 CARDONE 74-60018 mass air flow sensor.
Does MD334011 interchange with the A1 CARDONE 74-60018?
Critical components are 100% re-soldered, and each unit is 100% tested with automated computer test equipment. On-car validation routines also check form, durability and performance.
Yes. MD334011 is listed as an interchange number for the A1 CARDONE 74-60018 mass air flow sensor.
Is the A1 CARDONE 74-60018 right for the 1997-1998 Mitsubishi Montero Sport V6 3.0L?
Yes. A1 CARDONE 74-60018 is a direct-fit replacement for the 1997-1998 Mitsubishi Montero Sport V6 3.0L, which takes one sensor.
Yes. A1 CARDONE 74-60018 is listed for the 1997-1998 Mitsubishi Montero Sport V6 3.0L, and that vehicle takes one sensor.
Does this remanufactured sensor come with a mounting bracket or wiring harness?
No. The box holds one mass air flow sensor and an instruction sheet. Mounting hardware, the mounting bracket and the wiring harness are not included.
No. The box holds one mass air flow sensor and an instruction sheet. The wiring harness, mounting bracket and mounting hardware are not included.
Does this mass air flow sensor come with a wiring harness or mounting bracket?
No. The box holds one mass air flow sensor and an instruction sheet. Mounting hardware, the mounting bracket and the wiring harness are not included.
No. The box holds one mass air flow sensor and an instruction sheet. The wiring harness, mounting bracket and mounting hardware are not included.
What size is the outlet connection on this mass air flow sensor?
On the A1 CARDONE 74-60018, the outlet connection diameter is 78.4 mm (3.2 in). The connector is rectangular with 7 male pin terminals.
A1 CARDONE 74-60018 has one rectangular male connector with 7 male pin terminals and a 78.4 mm (3.2 in) outlet connection diameter. It mounts bolt-on with a hose clamp.
What connector does the 74-60018 use?
On the A1 CARDONE 74-60018, the outlet connection diameter is 78.4 mm (3.2 in). The connector is rectangular with 7 male pin terminals.
A1 CARDONE 74-60018 has one rectangular male connector with 7 male pin terminals and a 78.4 mm (3.2 in) outlet connection diameter. It mounts bolt-on with a hose clamp.
Could hesitation or stalling be coming from the mass air flow sensor?
It can be. A malfunctioning sensor can cause hesitation, stalling, poor fuel economy or poor engine performance, and a shop can read trouble codes with a scanner.
Common failures are cracked circuit boards, burnt sensing elements, poor solder joints, deteriorated conformal coating or loose printed circuit board components.
What goes bad inside a mass air flow sensor?
It can be. A malfunctioning sensor can cause hesitation, stalling, poor fuel economy or poor engine performance, and a shop can read trouble codes with a scanner.
Common failures are cracked circuit boards, burnt sensing elements, poor solder joints, deteriorated conformal coating or loose printed circuit board components.
How is this remanufactured mass air flow sensor tested?
Critical components are 100% re-soldered, and each unit is 100% tested with automated computer test equipment. On-car validation routines also check form, durability and performance.
Yes. MD334011 is listed as an interchange number for the A1 CARDONE 74-60018 mass air flow sensor.
Does MD334011 interchange with the A1 CARDONE 74-60018?
Critical components are 100% re-soldered, and each unit is 100% tested with automated computer test equipment. On-car validation routines also check form, durability and performance.
Yes. MD334011 is listed as an interchange number for the A1 CARDONE 74-60018 mass air flow sensor.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.