Remanufactured Mass Air Flow Sensor for 1995-1999 Ford Contour & More - A1 CARDONE 74-9522

$118.99

Vehicles this part fits

    Part number: 74-9522
    UPC: 082617400220
    Weight: 1.50 LBS
    Item Package Quantity: 1
    $118.99
    Adding to cart… The item has been added

    Have questions?

    CARDONE Reman Mass Air Flow Sensor P/N:74-9522
    CARDONE Reman Mass Air Flow Sensor P/N:74-9522
    $118.99
    $118.99

    A1 CARDONE 74-9522 mass air flow sensor for the 1995-1999 Ford Contour 4-cylinder 2.0L and other vehicles reports the air entering the engine to the engine control system. This remanufactured sensor takes 80% less energy and raw material to produce than a new part.

    • Output curves and tolerances held to spec for accurate scan tool readings
    • 100% re-soldering of critical components for solid electrical connections and fewer intermittent failures
    • On-car vehicle validation routines check durability and performance requirements
    • Every unit tested 100% on automated computer test equipment for full functionality
    • Components rated for demanding temperature variations

    Quick facts

    • Part: A1 CARDONE 74-9522 mass air flow sensor
    • Fits: 1995-1999 Ford Contour 4-cylinder 2.0L and other vehicles
    • Material: Aluminum (housing)
    • Condition: Remanufactured

    A failing mass air flow sensor can bring hesitation, stalling, poor fuel economy or poor engine performance. With the engine off, look at the sensor element for damage or a burnt smell, and leave scan tool code reading to a shop. Hesitation and stalling have many possible sources, so settle on the cause before buying a sensor.

    Fits

    This mass air flow sensor is a direct-fit replacement for the 1999 Mercury Cougar 4-cylinder 2.0L and the 1995-1999 Mercury Mystique 4-cylinder 2.0L, among others. Driving something else? Look for your car in the "Vehicles it fits" section. This listing is one sensor; the 1995-1999 Ford Contour 4-cylinder 2.0L takes one.

    Specifications

    Fit and size

    • Quantity per vehicle: 1
    • Inlet connection diameter: 83.82 mm (3.3 in)
    • Outlet connection diameter: 73.5 mm (3 in)
    • Mounting type: Hose clamp, 2 mounting holes
    • Connector: 1 rectangular male connector, 4 male pin terminals

    Build and materials

    • Condition: Remanufactured
    • Housing material: Aluminum
    • Electronics: Circuit board
    • Country of origin: Mexico

    In the box

    One mass air flow sensor and one instruction sheet. A mounting bracket, mounting hardware and a wiring harness are not included, and old mounting hardware may not be reusable, so plan on new pieces.

    Interchange: 93BB12B579BA · F5RZ12B579B

    Product information is for general reference and may contain errors. See our Disclaimer.

    This part cross-references / interchanges with the following part numbers:

    93BB12B579BA, F5RZ12B579B

    Frequently Asked Questions

    Is this mass air flow sensor the right one for the 1999 Mercury Cougar 4-cylinder 2.0L?

    Yes, A1 CARDONE 74-9522 is listed for the 1999 Mercury Cougar 4-cylinder 2.0L and the 1995-1999 Ford Contour 4-cylinder 2.0L; look in the "Vehicles it fits" section for other cars.

    Yes, A1 CARDONE 74-9522 is listed for the 1999 Mercury Cougar 4-cylinder 2.0L and the 1995-1999 Ford Contour 4-cylinder 2.0L; look in the "Vehicles it fits" section for other cars.

    Does the A1 CARDONE 74-9522 sensor come with a wiring harness or bracket?

    No, A1 CARDONE 74-9522 comes as one mass air flow sensor with an instruction sheet; the wiring harness, mounting bracket and mounting hardware are not included.

    No, A1 CARDONE 74-9522 comes as one mass air flow sensor with an instruction sheet; the wiring harness, mounting bracket and mounting hardware are not included.

    Does the A1 CARDONE 74-9522 sensor come with a wiring harness or bracket?

    No, A1 CARDONE 74-9522 comes as one mass air flow sensor with an instruction sheet; the wiring harness, mounting bracket and mounting hardware are not included.

    No, A1 CARDONE 74-9522 comes as one mass air flow sensor with an instruction sheet; the wiring harness, mounting bracket and mounting hardware are not included.

    What size are the inlet and outlet openings on this mass air flow sensor?

    The inlet connection diameter is 83.82 mm (3.3 in) and the outlet connection diameter is 73.5 mm (3 in). The sensor mounts with a hose clamp.

    The inlet connection diameter is 83.82 mm (3.3 in) and the outlet connection diameter is 73.5 mm (3 in). The sensor mounts with a hose clamp.

    What size are the inlet and outlet openings on this mass air flow sensor?

    The inlet connection diameter is 83.82 mm (3.3 in) and the outlet connection diameter is 73.5 mm (3 in). The sensor mounts with a hose clamp.

    The inlet connection diameter is 83.82 mm (3.3 in) and the outlet connection diameter is 73.5 mm (3 in). The sensor mounts with a hose clamp.

    What goes bad inside a mass air flow sensor?

    Cracked circuit boards, burnt sensing elements, poor solder joints, deteriorated conformal coating and loose circuit board components are the most common causes of sensor trouble.

    Cracked circuit boards, burnt sensing elements, poor solder joints, deteriorated conformal coating and loose circuit board components are the most common causes of sensor trouble.

    What goes bad inside a mass air flow sensor?

    Cracked circuit boards, burnt sensing elements, poor solder joints, deteriorated conformal coating and loose circuit board components are the most common causes of sensor trouble.

    Cracked circuit boards, burnt sensing elements, poor solder joints, deteriorated conformal coating and loose circuit board components are the most common causes of sensor trouble.

    Can this sensor replace one marked F5RZ12B579B?

    Yes. F5RZ12B579B is listed as a number this sensor replaces, and so is 93BB12B579BA.

    Yes. F5RZ12B579B is listed as a number this sensor replaces, and so is 93BB12B579BA.

    Can this sensor replace one marked F5RZ12B579B?

    Yes. F5RZ12B579B is listed as a number this sensor replaces, and so is 93BB12B579BA.

    Yes. F5RZ12B579B is listed as a number this sensor replaces, and so is 93BB12B579BA.

    Frequently Asked Questions

    Is this mass air flow sensor the right one for the 1999 Mercury Cougar 4-cylinder 2.0L?

    Yes, A1 CARDONE 74-9522 is listed for the 1999 Mercury Cougar 4-cylinder 2.0L and the 1995-1999 Ford Contour 4-cylinder 2.0L; look in the "Vehicles it fits" section for other cars.

    Yes, A1 CARDONE 74-9522 is listed for the 1999 Mercury Cougar 4-cylinder 2.0L and the 1995-1999 Ford Contour 4-cylinder 2.0L; look in the "Vehicles it fits" section for other cars.

    Does the A1 CARDONE 74-9522 sensor come with a wiring harness or bracket?

    No, A1 CARDONE 74-9522 comes as one mass air flow sensor with an instruction sheet; the wiring harness, mounting bracket and mounting hardware are not included.

    No, A1 CARDONE 74-9522 comes as one mass air flow sensor with an instruction sheet; the wiring harness, mounting bracket and mounting hardware are not included.

    Does the A1 CARDONE 74-9522 sensor come with a wiring harness or bracket?

    No, A1 CARDONE 74-9522 comes as one mass air flow sensor with an instruction sheet; the wiring harness, mounting bracket and mounting hardware are not included.

    No, A1 CARDONE 74-9522 comes as one mass air flow sensor with an instruction sheet; the wiring harness, mounting bracket and mounting hardware are not included.

    What size are the inlet and outlet openings on this mass air flow sensor?

    The inlet connection diameter is 83.82 mm (3.3 in) and the outlet connection diameter is 73.5 mm (3 in). The sensor mounts with a hose clamp.

    The inlet connection diameter is 83.82 mm (3.3 in) and the outlet connection diameter is 73.5 mm (3 in). The sensor mounts with a hose clamp.

    What size are the inlet and outlet openings on this mass air flow sensor?

    The inlet connection diameter is 83.82 mm (3.3 in) and the outlet connection diameter is 73.5 mm (3 in). The sensor mounts with a hose clamp.

    The inlet connection diameter is 83.82 mm (3.3 in) and the outlet connection diameter is 73.5 mm (3 in). The sensor mounts with a hose clamp.

    What goes bad inside a mass air flow sensor?

    Cracked circuit boards, burnt sensing elements, poor solder joints, deteriorated conformal coating and loose circuit board components are the most common causes of sensor trouble.

    Cracked circuit boards, burnt sensing elements, poor solder joints, deteriorated conformal coating and loose circuit board components are the most common causes of sensor trouble.

    What goes bad inside a mass air flow sensor?

    Cracked circuit boards, burnt sensing elements, poor solder joints, deteriorated conformal coating and loose circuit board components are the most common causes of sensor trouble.

    Cracked circuit boards, burnt sensing elements, poor solder joints, deteriorated conformal coating and loose circuit board components are the most common causes of sensor trouble.

    Can this sensor replace one marked F5RZ12B579B?

    Yes. F5RZ12B579B is listed as a number this sensor replaces, and so is 93BB12B579BA.

    Yes. F5RZ12B579B is listed as a number this sensor replaces, and so is 93BB12B579BA.

    Can this sensor replace one marked F5RZ12B579B?

    Yes. F5RZ12B579B is listed as a number this sensor replaces, and so is 93BB12B579BA.

    Yes. F5RZ12B579B is listed as a number this sensor replaces, and so is 93BB12B579BA.

    Reviews

    No reviews yet — be the first to review this product.

    Write a Review