Remanufactured Power Steering Pump for 2010-2011 Kia Soul - A1 CARDONE 21-503

$245.99

Vehicles this part fits

    Part number: 21-503
    UPC: 082617989237
    Weight: 4.70 LBS
    Item Package Quantity: 1
    $245.99
    Adding to cart… The item has been added

    Have questions?

    CARDONE Reman Power Steering Pump P/N:21-503
    CARDONE Reman Power Steering Pump P/N:21-503
    $245.99
    $245.99

    A1 CARDONE 21-503 power steering pump for the 2010-2011 Kia Soul supplies the hydraulic pressure that helps you turn the wheel. This remanufactured pump starts from the original design, with upgrades added where applicable.

    • Every unit goes through a hydraulic efficiency test
    • Critical components, including campacs and spool valves, are triple-tested
    • 100% new O-rings and HNBR seals; HNBR does not break down at high temperatures like conventional seal material
    • Shafts are surfaced to precise specifications to help prevent premature seal wear
    • Pressure relief valve is 100% tested and calibrated
    • Final assembly is computer-tested for pressure, bypass, fluid flow, valve operation, steering effort and noise

    Quick facts

    • Part: A1 CARDONE 21-503 power steering pump
    • Fits: 2010-2011 Kia Soul
    • Material: Aluminum (housing)
    • Condition: Remanufactured

    A whining noise, steering that feels heavy or assist that comes and goes can mean the pump is worn, though the steering gear and the drive belt can be behind the same signs, so find the cause before you replace the pump.

    Fits

    This power steering pump fits the 2010-2011 Kia Soul.

    Specifications

    Fit and size

    • Quantity per vehicle: 1
    • Outlet thread size: 16x1.5
    • Inlet diameter: 10.1092 mm (0.398 in)
    • Inlet attachment type: barb
    • Outlet attachment type: threaded
    • Hose port type: O-ring
    • Pulley: included, for a serpentine belt
    • Shaft type: press-on

    Build and materials

    • Housing material: Aluminum
    • Condition: Remanufactured
    • Reservoir: remote, not included
    • Country of origin: Mexico

    In the box

    One power steering pump with its pulley, an instruction sheet and a sealing kit. This listing is one pump, and the 2010-2011 Kia Soul takes one. The reservoir, reservoir cap, filter and mounting hardware are not included, so plan on new mounting bolts rather than reusing the old ones.

    Interchange: 571002K500

    Product information is for general reference and may contain errors. See our Disclaimer.

    This part cross-references / interchanges with the following part numbers:

    571002K500

    Frequently Asked Questions

    Is this a power steering pump replacement for the 2010-2011 Kia Soul?

    Yes. The A1 CARDONE 21-503 fits the 2010-2011 Kia Soul, and the car takes one pump.

    Yes. A1 CARDONE 21-503 fits the 2010-2011 Kia Soul, and the car takes one pump.

    Does the A1 CARDONE power steering pump come with a pulley?

    Yes. The A1 CARDONE 21-503 comes with its pulley, a sealing kit and an instruction sheet. The reservoir, its cap and mounting hardware are not included.

    Yes, the pulley is included, along with an instruction sheet and a sealing kit. The reservoir, reservoir cap, filter and mounting hardware are not included.

    Does this power steering pump come with a pulley?

    Yes. The A1 CARDONE 21-503 comes with its pulley, a sealing kit and an instruction sheet. The reservoir, its cap and mounting hardware are not included.

    Yes, the pulley is included, along with an instruction sheet and a sealing kit. The reservoir, reservoir cap, filter and mounting hardware are not included.

    What size is the outlet thread on this power steering pump?

    The outlet is threaded at 16x1.5 and the hose port type is O-ring. The inlet is a barb with a diameter of 0.398 in (10.1092 mm).

    The seals are HNBR, and every unit gets 100% new O-rings. HNBR holds up at high temperatures where conventional seal material breaks down.

    What seals does this A1 CARDONE power steering pump use?

    The outlet is threaded at 16x1.5 and the hose port type is O-ring. The inlet is a barb with a diameter of 0.398 in (10.1092 mm).

    The seals are HNBR, and every unit gets 100% new O-rings. HNBR holds up at high temperatures where conventional seal material breaks down.

    How is this remanufactured power steering pump tested?

    Every unit gets a hydraulic efficiency test. The final assembly is computer-tested for pressure, bypass, fluid flow, valve operation, steering effort and noise.

    Yes, 571002K500 is listed as an interchange number for A1 CARDONE 21-503.

    Does the A1 CARDONE 21-503 replace number 571002K500?

    Every unit gets a hydraulic efficiency test. The final assembly is computer-tested for pressure, bypass, fluid flow, valve operation, steering effort and noise.

    Yes, 571002K500 is listed as an interchange number for A1 CARDONE 21-503.

    Do I need a new pulley if the old one fits loosely on the shaft?

    Yes. The old pulley may have cracked on removal, or a mushroomed shaft on the old pump may have enlarged its bore, and the pulley must be replaced in either case.

    Each unit has a hydraulic efficiency test, and the finished pump is computer-tested on pressure, bypass, fluid flow, valve operation, steering effort and noise.

    How is this remanufactured power steering pump tested?

    Yes. The old pulley may have cracked on removal, or a mushroomed shaft on the old pump may have enlarged its bore, and the pulley must be replaced in either case.

    Each unit has a hydraulic efficiency test, and the finished pump is computer-tested on pressure, bypass, fluid flow, valve operation, steering effort and noise.

    Frequently Asked Questions

    Is the A1 CARDONE 21-503 a 2010 Kia Soul power steering pump replacement?

    Yes. The A1 CARDONE 21-503 fits the 2010-2011 Kia Soul, and the car takes one pump.

    Yes. A1 CARDONE 21-503 fits the 2010-2011 Kia Soul, and the car takes one pump.

    Does the A1 CARDONE power steering pump come with a pulley?

    Yes. The A1 CARDONE 21-503 comes with its pulley, a sealing kit and an instruction sheet. The reservoir, its cap and mounting hardware are not included.

    Yes, the pulley is included, along with an instruction sheet and a sealing kit. The reservoir, reservoir cap, filter and mounting hardware are not included.

    Does this power steering pump come with a pulley?

    Yes. The A1 CARDONE 21-503 comes with its pulley, a sealing kit and an instruction sheet. The reservoir, its cap and mounting hardware are not included.

    Yes, the pulley is included, along with an instruction sheet and a sealing kit. The reservoir, reservoir cap, filter and mounting hardware are not included.

    What size is the outlet thread on this power steering pump?

    The outlet is threaded at 16x1.5 and the hose port type is O-ring. The inlet is a barb with a diameter of 0.398 in (10.1092 mm).

    The seals are HNBR, and every unit gets 100% new O-rings. HNBR holds up at high temperatures where conventional seal material breaks down.

    What seals does this A1 CARDONE power steering pump use?

    The outlet is threaded at 16x1.5 and the hose port type is O-ring. The inlet is a barb with a diameter of 0.398 in (10.1092 mm).

    The seals are HNBR, and every unit gets 100% new O-rings. HNBR holds up at high temperatures where conventional seal material breaks down.

    How is this remanufactured power steering pump tested?

    Every unit gets a hydraulic efficiency test. The final assembly is computer-tested for pressure, bypass, fluid flow, valve operation, steering effort and noise.

    Yes, 571002K500 is listed as an interchange number for A1 CARDONE 21-503.

    Does the A1 CARDONE 21-503 replace number 571002K500?

    Every unit gets a hydraulic efficiency test. The final assembly is computer-tested for pressure, bypass, fluid flow, valve operation, steering effort and noise.

    Yes, 571002K500 is listed as an interchange number for A1 CARDONE 21-503.

    Do I need a new pulley if the old one fits loosely on the shaft?

    Yes. The old pulley may have cracked on removal, or a mushroomed shaft on the old pump may have enlarged its bore, and the pulley must be replaced in either case.

    Each unit has a hydraulic efficiency test, and the finished pump is computer-tested on pressure, bypass, fluid flow, valve operation, steering effort and noise.

    How is this remanufactured power steering pump tested?

    Yes. The old pulley may have cracked on removal, or a mushroomed shaft on the old pump may have enlarged its bore, and the pulley must be replaced in either case.

    Each unit has a hydraulic efficiency test, and the finished pump is computer-tested on pressure, bypass, fluid flow, valve operation, steering effort and noise.

    Reviews

    No reviews yet — be the first to review this product.

    Write a Review