Cloyes 9-5618 right timing chain tensioner for the 2005-2015 Toyota Tacoma V6 4.0L and other vehicles holds the timing chain at the right tension. Also called an engine timing chain tensioner, it takes up slack in the chain as it runs.
- Hydraulic and spring damper with an activation pin
- CAD-designed, heat-treated cast body
- Tested for function, fitment and durability
Quick facts
- Part: Cloyes 9-5618 timing chain tensioner
- Also called: engine timing chain tensioner
- Fits: 2005-2015 Toyota Tacoma V6 4.0L and other vehicles
- Position: Right
- Material: Cast
- Condition: New
A worn tensioner can show up as chain rattle at startup or slack in the timing chain. Before you replace it, rule out a stretched chain or worn guides and sprockets, since they can make the same noise.
Fits
The 2005-2015 Toyota Tacoma V6 4.0L, the 2005-2011 Toyota Tundra V6 4.0L and the 2003-2009 Toyota 4Runner V6 4.0L all take this tensioner, and so do other vehicles. This listing is one tensioner for the right side; the 2005-2015 Toyota Tacoma V6 4.0L takes one there, and the left side is a separate part.
Specifications
Fit and size
- Position: Right
- Quantity per vehicle: 1
- Mounting hole diameter: 0.26 in (6.604 mm)
- Mounting hole quantity: 2
Build and materials
- Type: Standard replacement
- Activation type: Activation pin
- Damper type: Hydraulic, spring
- Material: Cast
- Condition: New
- Warranty: Cloyes Limited Lifetime Warranty
In the box
One right timing chain tensioner. Mounting bolts, mounting hardware, a gasket or seal and the shoe are not included, so plan on new bolts.
Product information is for general reference and may contain errors. See our Disclaimer.
Frequently Asked Questions
Is this the right timing chain tensioner for the 2005-2011 Toyota Tundra V6 4.0L?
Yes, Cloyes 9-5618 right timing chain tensioner fits the 2005-2011 Toyota Tundra V6 4.0L. For any other car, find your year, model and engine in the "Vehicles it fits" section on this page.
Is this the timing chain tensioner for the right side of a 2005-2015 Toyota Tacoma V6 4.0L?
Yes, this is the right-side tensioner for that truck, which takes one there; the left side is a separate part.
Does the Cloyes 9-5618 come with mounting bolts?
No, Cloyes 9-5618 is one right tensioner without mounting bolts, mounting hardware, a gasket or seal or the shoe; plan on new bolts.
Is this tensioner hydraulic or spring-loaded?
This tensioner's damper is both hydraulic and spring, and it has an activation pin. The body is cast, with two mounting holes of 6.604 mm each.
Should the chain and sprockets be changed along with this tensioner?
Yes, the chain, guides and sprockets are best replaced along with the tensioner during service, so the timing system is renewed together.
