MOOG RK622916 front left lower control arm with ball joint for the 2013-2019 Ford Taurus and other vehicles locates the wheel and pivots with the suspension. This MOOG control arm comes with the ball joint already installed.
- Forged steel arm engineered for structural strength and corrosion protection
- Induction-hardened studs and a patent-pending carbon fiber-reinforced bearing to reduce socket friction
- Optimized rubber bushings for quiet operation and resistance to wear, salt, road grime and oils
- Sealed ball joint socket for maintenance-free operation
- Heat treated to inhibit premature failure
- Coated studs and an e-coated arm to inhibit premature deterioration
Quick facts
- Part: MOOG RK622916 control arm with ball joint
- Also called: control arm and ball joint assembly
- Fits: 2013-2019 Ford Taurus and other vehicles
- Position: Front left lower
- Material: Forged steel (arm), rubber (bushings)
- Condition: New
Clunks over bumps, uneven tire wear or loose steering can come from a worn arm, bushing or ball joint, though other suspension parts cause them too. With the engine off, look for cracked bushing rubber or a torn ball joint boot; a shop can test joint play. If the arm is the cause, this MOOG front lower control arm replaces the left one.
Fits
This MOOG lower control arm fits the left front of the 2013-2019 Ford Police Interceptor Sedan and the 2014-2018 Ford Special Service Police Sedan, along with many other Ford and Lincoln models.
Specifications
Fit and size
- Position: front left lower
- Quantity per vehicle: 1 (this side)
- Ball joint mounting type: press in
- Ball joint stud type: threaded
- Adjustable: no
Build and materials
- Type: control arm with pre-installed ball joint, bushings included
- Control arm material: forged steel
- Bushing material: rubber
- Coating: e-coated arm, coated studs
- Condition: New
- Country of origin: Taiwan
In the box
One control arm with ball joint and bushings. A grease fitting is not included. This listing is one arm for the front left, and the front left takes one; the front right is a separate part ordered separately, and the two sides are normally replaced together.
Installation notes
- All necessary installation hardware comes with the arm.
- Precision tolerances are intended to make installation and steering alignment easy.
Interchange: 810-503806B · 528-353 · 522-031
62261028 · TC3977 · TC5850 · CB85143 · CB85143PR · CB85233PR · DA5Z3079A · DA5Z3079D · FA5Z3079A · CMS401119 · CMS401122 · CMS401186
This part cross-references / interchanges with the following part numbers:
810-503806B, 62261028, TC3977, TC5850, 528-353, CB85143, 522-031, CB85143PR, CB85233PR, DA5Z3079A, DA5Z3079D, FA5Z3079A, CMS401119, CMS401122, CMS401186
Frequently Asked Questions
Does the MOOG RK622916 fit the 2013-2019 Ford Police Interceptor Sedan?
Yes. MOOG RK622916 is a front left lower control arm for the 2013-2019 Ford Police Interceptor Sedan and the 2013-2019 Ford Taurus. If your car isn't named here, look it up in the "Vehicles it fits" section.
Does the MOOG control arm bushing come with this arm?
Yes. Bushings are included with this arm, and the ball joint comes pre-installed. A grease fitting is not included.
What material is the MOOG lower control arm bushing in this assembly?
The bushings are rubber, and the arm itself is forged steel. The bushings are optimized for quiet operation and resistance to wear, salt, road grime and oils.
Is the ball joint on this control arm and ball joint assembly a press-in type?
Yes. The ball joint on this arm is a press-in type with a threaded stud, and it comes pre-installed with a sealed socket.
Is 522-031 an interchange number for MOOG RK622916?
Yes. 522-031 is one of the numbers MOOG RK622916 replaces. The rest of the cross-references are on the Interchange line at the end of the page.
