MOOG Chassis Products RK623585 front right lower control arm with ball joint for the 2016-2020 Chevrolet Camaro links the wheel end to the chassis. This control arm and ball joint assembly covers the front right lower rearward position.
- Engineered for structural strength and corrosion protection
- Precision tolerances for easy installation and steering alignment
- Ball stud shape ensures fatigue life and adds extra swing
- Heat treated to inhibit premature failure
- Optimized bushings for quiet operation and resistance to wear, salt, road grime and oils
- Preinstalled ball joint with a sealed socket for maintenance-free operation
Quick facts
- Part: MOOG Chassis Products RK623585 control arm with ball joint
- Also called: control arm and ball joint assembly
- Fits: 2016-2020 Chevrolet Camaro
- Position: Front right lower rearward
- Condition: New
A clunk over bumps, loose or wandering steering and uneven tire wear can all come from a worn arm, bushing or ball joint. These signs alone do not prove this arm is the problem, since a worn tie rod end can produce similar symptoms.
Fits
It fits the 2016-2020 Chevrolet Camaro. Each side of the front axle takes one of these arms, so plan to replace the pair together; this listing is one arm for the front right, and the left side is ordered separately.
Specifications
Fit and size
- Position: Front right lower rearward
- Quantity: 1
Build and materials
- Type: Control arm with ball joint
- Bushings: included
- Ball joint: included, preinstalled
- Condition: New
- Country of origin: China
In the box
One control arm with its bushings and ball joint.
Interchange: 527-220
CB92094PR · 23317366 · CMS501303 · 2CB503314
This part cross-references / interchanges with the following part numbers:
527-220, CB92094PR, 23317366, CMS501303, 2CB503314
Frequently Asked Questions
Is this MOOG RK623585 control arm right for the 2016-2020 Chevrolet Camaro?
Yes. MOOG Chassis Products RK623585 is the front right lower rearward control arm with ball joint for the 2016-2020 Chevrolet Camaro.
Does the MOOG RK623585 arm come with bushings and a ball joint?
Yes. MOOG RK623585 includes its bushings and a preinstalled ball joint with a sealed socket, so the ball joint does not need to be bought separately.
Is this lower control arm for the left or right side?
This lower control arm is for the front right, in the lower rearward position. The left side is a separate part ordered on its own.
How can I tell if the bushings or ball joint on a front lower control arm are worn?
A clunk over bumps, loose steering or uneven tire wear can point to wear. Checking ball joint play means raising the vehicle, so a shop is the place to have that done.
Is this MOOG control arm heat treated?
Yes. It is heat treated to match or exceed OE requirements and to inhibit premature failure.
