MOOG RK620889 front right lower control arm with ball joint for the 2007-2016 Chevrolet Silverado 1500 and other vehicles connects the front right wheel to the suspension. This MOOG lower control arm is a forged steel arm that comes with its ball joint.
- Optimized rubber bushings for quiet operation and resistance to wear, salt, road grime and oils
- Ball stud shape ensures fatigue life and adds extra swing
- Heat treated to inhibit premature failure
- Coated studs and an e-coated arm to inhibit premature deterioration
Quick facts
- Part: MOOG RK620889 control arm with ball joint
- Also called: control arm and ball joint assembly
- Fits: 2007-2016 Chevrolet Silverado 1500 and other vehicles
- Position: Front right lower
- Material: Forged steel control arm with rubber bushings
- Condition: New
A clunk over bumps, loose steering or uneven tire wear can mean a worn bushing or ball joint. These signs alone do not prove the arm is at fault; a worn tie rod end can loosen steering too. This listing is one front right arm; the 2007-2016 Chevrolet Silverado 1500 also needs a front left, ordered separately, and both sides are normally replaced together.
Fits
This front right lower control arm with ball joint fits the 2007-2016 Chevrolet Silverado 1500, the 2007-2016 GMC Sierra 1500, the 2007-2016 Chevrolet Tahoe and other vehicles. If yours is not among them, look up your own year, make and model in the "Vehicles it fits" section.
Specifications
Fit and size
- Position: Front right lower
- Quantity per vehicle: 1
- Maximum length: 20.41 in
- Ball joint mounting type: Press in
- Adjustable: No
Build and materials
- Type: Control arm with ball joint, bushings included
- Control arm material: Forged steel
- Bushing material: Rubber
- Ball joint stud: Threaded, coated
- Condition: New
- Country of origin: Taiwan
In the box
One control arm with ball joint, bushings, grease fitting and mounting hardware.
Installation notes
- Comes pre-greased, with a grease fitting included.
- This MOOG control arm is made with precision tolerances for easy installation and steering alignment.
Frequently Asked Questions
Will this MOOG front lower control arm fit a 2007-2016 GMC Sierra 1500?
Yes. MOOG RK620889 fits the front right lower position of the 2007-2016 GMC Sierra 1500. The left side is a separate part.
Does this arm include a MOOG control arm bushing, or is that sold separately?
The bushings are included. MOOG RK620889 also comes with the ball joint, a grease fitting and mounting hardware.
What is the MOOG lower control arm bushing made of on this assembly?
The bushings are rubber, and the control arm itself is forged steel. The bushings are optimized for quiet operation and resist wear, salt, road grime and oils.
Is the ball joint on this arm press-in or bolt-in?
This arm has a press-in ball joint mounting type with a threaded ball stud. The studs are coated to inhibit premature deterioration.
Is this control arm and ball joint assembly pre-greased?
Yes. MOOG RK620889 comes pre-greased and includes a grease fitting. It is not an adjustable arm.
