Dayco 17315 accessory drive belt for the 1992-1997 International 9300 6-cylinder 11.1L or 12.7L and other vehicles carries engine power to the belt-driven accessories.
- Bottom cog construction
- Synthetic rubber compound
- Angle of 36 degrees
- Operating temperature range of -35 F to 175 F (-37.2 C to 79.4 C)
- Meets SAE J636 and SAE J637
Quick facts
- Part: Dayco 17315 accessory drive belt
- Fits: the 1992-1997 International 9300 6-cylinder 11.1L or 12.7L and other vehicles
- Position: Alternator, power steering, air conditioning, fan and generator, air conditioning and idler
- Material: Synthetic rubber compound
- Condition: New
With the engine off, cracks, glazing or fraying on the belt surface can mean it is worn, and a squeal while driving can point the same way. Before you replace this belt, rule out a seized pulley or a weak tensioner, because a bad pulley or tensioner can wear out a new belt too.
Fits
The 1992-1997 International 9300 6-cylinder 11.1L or 12.7L, the 1995-1997 International 9200 SBA 6-cylinder 11.1L or 12.7L and the 1994-1997 Peterbilt 357 6-cylinder 12.7L are among the vehicles it fits. A 1992-1997 International 9300 6-cylinder 11.1L or 12.7L takes two, and this listing is one belt. If your vehicle is not named here, find its year, make and model in the "Vehicles it fits" section.
Specifications
Fit and size
- Position: Alternator, power steering, air conditioning, fan and generator, air conditioning and idler
- Angle: 36 degrees
Build and materials
- Construction: Bottom cog, not banded
- Material: Synthetic rubber compound
- Standards: SAE J636, SAE J637
- Operating temperature: -35 F to 175 F (-37.2 C to 79.4 C)
- Condition: New
Interchange: 141-0281 · L51-17315 · L38-0800 · JC-320C · 12.5X800 · 17-316 · 17-320
16312 · B3305 · 31517
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
16312, B3305, 141-0281, NA, 31517, 17315, L51-17315, L38-0800, JC-320C, 12.5X800, 17-316, 17-320, 17316
Frequently Asked Questions
Is this Dayco accessory drive belt right for the 1992-1997 International 9300 6-cylinder 11.1L or 12.7L?
Yes. Dayco 17315 fits the 1992-1997 International 9300 6-cylinder 11.1L or 12.7L, and each one takes two belts.
Does the Dayco 17315 belt fit the 1994-1997 Peterbilt 357 6-cylinder 12.7L?
Yes. Dayco 17315 fits the 1994-1997 Peterbilt 357 6-cylinder 12.7L; for any other vehicle, look up its year, make and model in the "Vehicles it fits" section.
Which SAE standards does the Dayco 17315 belt meet?
Dayco 17315 is listed to SAE J636 and SAE J637.
What temperatures can this accessory drive belt operate in?
This belt operates from -35 F (-37.2 C) up to 175 F (79.4 C).
Is this belt a banded belt, and what is it made of?
No, it is not a banded belt. This is a bottom cog belt made of a synthetic rubber compound, with an angle of 36 degrees.
