Dayco 17463 accessory drive belt for the 1971 Ford F-250 V8 5.0L and other vehicles carries engine power to the belt-driven accessories.
- Bottom cog construction on a non-banded belt
- Synthetic rubber compound
- Operating range from -35 °F to 175 °F (-37.2 °C to 79.4 °C)
- SAE J636 and SAE J637 standards
Quick facts
- Part: Dayco 17463 accessory drive belt
- Fits: 1971 Ford F-250 V8 5.0L and other vehicles
- Material: synthetic rubber compound
- Condition: New
On a cool, stopped engine, look for cracks, fraying, glazing or chunks missing from the cogs. Squealing at startup can also mean the belt is worn. A weak tensioner, a misaligned or seized pulley or a failing accessory bearing can be behind the same signs, so find the cause before buying a belt.
Fits
This belt is listed for a wide range of Ford, Hino and International models, including the 2008-2010 Hino 145 and the 2008-2010 Hino 165. The 2008-2010 Hino 165 takes two, and the 1971 Ford F-250 V8 5.0L takes one. If your year, make and model are not named here, look them up under the "Vehicles it fits" section.
Specifications
Fit and size
- Belt angle: 36 degrees
- Quantity per vehicle: 1 or 2, depending on the application
Build and materials
- Belt construction: bottom cog
- Banded belt: no
- Material: synthetic rubber compound
- Operating temperature: -35 °F to 175 °F (-37.2 °C to 79.4 °C)
- Standards: SAE J636, SAE J637
- Condition: New
Interchange: 141-1217 · L38-1175 · JC-465 · 25-11755 · 25-11755-2 · 25-9463 · 25-9463-2 · 25-9463HD · 12.5X1170 · 12.5X1175
2T17463 · 9463HD · FB17463 · 9463 · 46317 · 6505 · 8266 · 17465 · 16463 · 16466
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
17463, 2T17463, 9463HD, FB17463, 141-1217, 9463, 46317, 6505, 8266, L38-1175, 17465, JC-465, 25-11755, 25-11755-2, 25-9463, 25-9463-2, 25-9463HD, 12.5X1170, 12.5X1175, 16463, 16466
Frequently Asked Questions
Is this Dayco accessory drive belt the right one for the 2008-2010 Hino 165?
Yes. Dayco 17463 is listed for the 2008-2010 Hino 165, which takes two. For other years and models, use the "Vehicles it fits" section.
Is the Dayco 17463 belt listed for the 2008-2010 Hino 145?
Yes. Dayco 17463 is listed for the 2008-2010 Hino 145. The 2008-2009 trucks take two belts and the 2010 truck takes one.
What construction and compound does the Dayco 17463 belt use?
Dayco 17463 is a bottom cog belt made of a synthetic rubber compound. It is not a banded belt, and its belt angle is 36 degrees.
What temperatures is this drive belt rated for?
This belt is rated for operation from -35 °F to 175 °F (-37.2 °C to 79.4 °C). It is listed to SAE J636 and SAE J637.
Does Dayco 17463 replace belt number 25-9463?
Yes. 25-9463 is one of the numbers cross-referenced to Dayco 17463; the rest are on the Interchange line.
