Dayco 17380 accessory drive belt for the 1972-1975 Toyota Corolla 4-cylinder 1.6L and other vehicles carries power from the crankshaft to the engine's belt-driven accessories.
- Synthetic rubber compound
- Bottom cog construction
- Operates from -35 °F to 175 °F (-37.2 °C to 79.4 °C)
- SAE J636 and SAE J637 standards
Quick facts
- Part: Dayco 17380 accessory drive belt
- Fits: 1972-1975 Toyota Corolla 4-cylinder 1.6L and other vehicles
- Material: synthetic rubber compound
Squealing, slipping, or an accessory that loses drive can mean the belt is worn, though a weak tensioner or a misaligned pulley can make similar noises. With the engine off and cool, look along the whole belt for cracks, fraying, glazing or missing cog sections. If it looks sound, track down the source of the noise before buying a new belt.
Fits
Listed for a wide range of engines, this accessory drive belt fits the 1972-1975 Toyota Corolla 4-cylinder 1.6L, the 1985-1987 Jeep Cherokee 4-cylinder 2.1L and the 1981-1984 Volkswagen Jetta 4-cylinder 1.6L, along with many other vehicles. Open the "Vehicles it fits" section and look up your exact model and engine to see whether yours is among them.
Specifications
Fit and size
- Quantity per vehicle: 1
- Belt angle: 36 degrees
Build and materials
- Compound: synthetic rubber
- Construction: bottom cog
- Banded belt: No
- Standards: SAE J636, SAE J637
- Operating temperature: -35 °F to 175 °F (-37.2 °C to 79.4 °C)
In the box
One accessory drive belt. This listing holds one, and these vehicles take one belt each.
Frequently Asked Questions
Is the Dayco 17380 a 1972-1975 Toyota Corolla 4-cylinder 1.6L drive belt?
Yes. The Dayco 17380 is listed for the 1972-1975 Toyota Corolla 4-cylinder 1.6L, and the car takes one belt. For other models and engines, use the "Vehicles it fits" section.
What temperature range can the Dayco 17380 belt handle?
The Dayco 17380 operates from -35 °F to 175 °F (-37.2 °C to 79.4 °C), its listed minimum and maximum operating temperatures.
What is this bottom cog drive belt made of?
This belt uses a synthetic rubber compound with bottom cog construction. It is not a banded belt.
Does the Dayco 17380 meet any SAE standards?
Yes. The Dayco 17380 accessory drive belt is listed to SAE J636 and SAE J637.
How can I tell if a cogged drive belt like this one is worn?
With the engine off and cool, look for cracks, fraying, glazing or missing cog sections. Squealing or slipping while driving can also be a sign of wear.
