Dayco 17460 accessory drive belt for the 1975-1979 Ford F-150 V8 7.5L, the 1980-1986 F-150 6-cylinder 4.9L and other vehicles turns the engine's belt-driven accessories from the crankshaft pulley.
- Bottom cog construction
- Synthetic rubber compound
- Standards: SAE J636 and SAE J637
- Operating range of -35 F to 175 F (-37.2 C to 79.4 C)
Quick facts
- Part: Dayco 17460 accessory drive belt
- Fits: the 1975-1979 Ford F-150 V8 7.5L, the 1980-1986 F-150 6-cylinder 4.9L and other vehicles
- Material: Synthetic rubber compound
- Condition: New
Cracks across the cogs, fraying, a glazed or shiny contact surface, or squealing at start-up can mean the belt is worn; look it over with the engine off and cool. These signs alone do not prove the belt is the problem, since a pulley that is out of line can also make a belt squeal.
Fits
The vehicles it fits include the 1972-1974 Ford F-250 V8 5.9L or 6.4L and the 1979-1983 Ford Mustang 4-cylinder 2.3L, along with many others.
Specifications
Fit and size
- Length: 46 in (1168.40 mm) and 46.27 in (1175.26 mm)
- Angle: 36 degrees
Build and materials
- Construction: bottom cog
- Material: synthetic rubber compound
- Banded belt: no
- Condition: new
In the box
One accessory drive belt. The vehicles named above each take one.
Interchange: 141-1107 · L51-17460 · L38-1170 · 12.5X1168 · 16-462 · 17-462
FB17460 · 7460 · 16466 · 3450 · B3450 · RPF3450 · RPF3460 · 46017 · 13A1170 · 17461 · 17W460L · JC463LA · JC463LA1
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Frequently Asked Questions
Does the Dayco 17460 belt fit the 1975-1979 Ford F-150 V8 7.5L?
Yes. Dayco 17460 fits the 1975-1979 Ford F-150 V8 7.5L and the 1980-1986 F-150 6-cylinder 4.9L. If your truck is a different one, look it up in the "Vehicles it fits" section.
What length is the Dayco 17460 accessory drive belt?
Dayco 17460 is listed at 46 in (1168.40 mm) and 46.27 in (1175.26 mm) in length, with a 36-degree angle.
Is this accessory drive belt a bottom cog belt?
Yes. This accessory drive belt has bottom cog construction and a synthetic rubber compound body. It is a single belt, not a banded one.
What temperature range and standards does this belt cover?
This accessory drive belt is rated for -35 F to 175 F (-37.2 C to 79.4 C). It is listed to SAE J636 and SAE J637.
What belt wear can I spot with the engine off?
With the engine off and cool, look for cracks across the cogs, fraying, and glazed or shiny sides. Any of these can mean the belt is due for replacement.
Reviews
No reviews yet — be the first to review this product.
Write a ReviewWrite a Review