Dayco Serpentine Belt P/N:5060665
Dayco 5100540 serpentine belt for the 2000 International 9100i SBA 6-cylinder 11.1L, the 2001-2003 9100i SBA 6-cylinder 12.7L and other vehicles carries engine power to the belt-driven accessories. It is listed for the fan position.
A belt that is cracked across the ribs, frayed at the edges, glazed or squealing can be worn out. A tensioner that has lost spring force, a worn idler pulley or a seized accessory pulley can be behind a squeal or a slipping belt too, so find the cause before you buy.
This serpentine belt also fits the 2000 International 9200i SBA 6-cylinder 11.1L, the 2000-2003 9200i SBA 6-cylinder 12.7L, the 2000 International 9400i SBA 6-cylinder 11.1L and the 2000-2003 9400i SBA 6-cylinder 12.7L. If your vehicle is not named here, match its year and engine against the "Vehicles it fits" section.
Fit and size
Build and materials
One serpentine belt. That is the quantity each engine needs, so a single listing covers it.
Interchange: 25-100540 · 25-100540HD · 25-71374 · 45-542K
10K540 · K100540HD · 10PK1370 · K100540 · 4100540 · 6460 · 42855 · 540K10
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Does the Dayco 5100540 serpentine belt fit the 2000 International 9100i SBA 6-cylinder 11.1L?
Yes. Dayco 5100540 is listed for the 2000 International 9100i SBA 6-cylinder 11.1L and the 2001-2003 9100i SBA 6-cylinder 12.7L. The "Vehicles it fits" section covers other vehicles.
What is this Dayco drive belt made of?
Dayco 5100540 is made of EPDM with aramid reinforcement. It has a K-section, straight rib profile with standard rib depth.
What operating temperatures is this EPDM serpentine belt rated for?
Dayco 5100540 operates from -45°F to 212°F (-42.7°C to 100°C). It is also listed to SAE J1459 and SAE J2432 standards.
Is this Dayco fan belt meant for the fan position?
Yes. This belt is listed for the fan position and is a serpentine belt, sold as one belt per listing.
What should I look for on a worn serpentine belt?
With the engine off and cool, look for cracks across the ribs, frayed edges or a shiny glazed surface. Any of these can mean the belt is worn, and a shop can check belt tension.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.