Delphi FE0379 electric fuel pump for the 1994-1999 Buick LeSabre and other vehicles delivers fuel from the tank to the engine. This in-tank pump is built to Delphi's OE standards.
- Designed to operate under extreme temperatures with quick engine starts
- Helps restore fast fuel pressure and system integrity while using less energy
- Validated and tested for its application
- Lower amperage draw puts less load on the vehicle's electrical system
Quick facts
- Part: Delphi FE0379 electric fuel pump
- Fits: 1994-1999 Buick LeSabre and other vehicles
- Position: In-tank
- Condition: New
A weak pump can show up as hard starting, a stumble or stall under load, or a whine from the tank. A blocked strainer or a damaged connector can produce similar symptoms, so look over the fuse and wiring with the engine off before you order.
Fits
This pump is listed for a wide range of Buick, Oldsmobile and Pontiac models, including the 1994-1999 Buick LeSabre, the 1994-1999 Oldsmobile 88 and the 1994-1999 Pontiac Bonneville V6 3.8L. The 1994-1999 Buick LeSabre takes one. If your car is not named here, search your year, model and engine in the "Vehicles it fits" section.
Specifications
Fit and size
- Position: In-tank
- Quantity per vehicle: 1
Build and materials
- Type: Electric
- Wiring: 2-wire harness with connector
- Condition: New
In the box
One electric fuel pump, an isolator, a seal, two splices, a 2-wire harness with connector and an instruction sheet.
Installation notes
- Check and clean the fuel tank before installing the pump.
- Replace the fuel strainer whenever the fuel pump is replaced.
Frequently Asked Questions
Is the Delphi FE0379 the right fuel pump for a 1994-1999 Oldsmobile 88?
Yes. Delphi FE0379 is listed for the 1994-1999 Oldsmobile 88, and the car takes one pump.
Does the Delphi FE0379 come with a harness and seal?
Yes. Delphi FE0379 comes with an isolator, a seal, two splices, a 2-wire harness with connector and an instruction sheet, along with the pump.
Can this in-tank pump handle extreme temperatures?
Yes. Delphi FE0379 is designed for extreme temperatures and quick engine starts, and its lower amperage draw puts less load on the electrical system.
Should the fuel strainer be replaced when installing this fuel pump?
Yes. The fuel strainer should be replaced whenever the pump is replaced, and the fuel tank should be checked and cleaned first.
Does a whine from the tank mean the fuel pump needs replacing?
Not always. A whine, hard starting or stalling can come from a worn pump, but other fuel-system faults can do the same, and a shop can test fuel pressure with the engine running.
