Delphi FE0486 electric fuel pump for the 1986-1989 Honda Accord 4-cylinder 2.0L, the 1990-1993 Accord 4-cylinder 2.2L and other vehicles sends fuel from the tank to the engine. It sits inside the fuel tank and is built to Delphi's OE standards.
- Designed to operate under extreme temperatures with quick engine starts
- Helps restore fast pressure performance and system integrity while using less energy
- Validated and tested pump
- Lower amperage draw puts less load on the vehicle's electrical system
Quick facts
- Part: Delphi FE0486 electric fuel pump
- Fits: 1986-1989 Honda Accord 4-cylinder 2.0L, the 1990-1993 Accord 4-cylinder 2.2L and other vehicles
- Position: In-tank
- Condition: New
Hard starting, sputtering at speed or an engine that cranks but will not run can be signs of a weak pump. Those signs alone do not prove the pump is at fault, since a clogged fuel filter can starve the engine as well.
Fits
This pump is listed for a wide range of Honda, Toyota, Mazda and Mitsubishi models, including the 1985-1993 Toyota Corolla 4-cylinder 1.6L, the 1985-1991 Toyota Camry 4-cylinder 2.0L and the 1988-1991 Camry V6 2.5L. If your car is not named here, open the "Vehicles it fits" section and look up your exact model and engine.
Specifications
Fit and size
- Position: In-tank
- Quantity per vehicle: 1
Build and materials
- Type: Electric fuel pump
- Condition: New
In the box
One electric fuel pump, two hose clamps, one hose piece, one isolator, one pall nut, two seals and instruction sheets. This listing is one pump, and the vehicle takes one.
Installation notes
- Check and clean the fuel tank before installing the pump.
- Replace the fuel strainer whenever you repair a fuel pump.
- Instruction sheets come with the pump.
Frequently Asked Questions
Is the Delphi FE0486 the Toyota Camry electric fuel pump for the 1985-1991 Camry 4-cylinder 2.0L and the 1988-1991 Camry V6 2.5L?
Yes. Delphi FE0486 is listed for the 1985-1991 Toyota Camry 4-cylinder 2.0L and the 1988-1991 Camry V6 2.5L, at one pump per car.
Does the Delphi electric fuel pump come with hose clamps and seals?
Yes. The box holds the pump, two hose clamps, a hose piece, an isolator, a pall nut, two seals and instruction sheets.
Is the FE0486 an in-tank fuel pump?
Yes. Delphi FE0486 is an in-tank electric fuel pump, so it mounts inside the fuel tank.
Should the fuel strainer be replaced when installing this fuel pump?
Yes. Always replace the fuel strainer during a fuel pump repair, and check and clean the tank first. Instruction sheets come in the box.
Can the Delphi FE0486 handle extreme temperatures?
Delphi pumps, including the FE0486, are designed to operate under extreme temperatures with quick engine starts.
