Delphi FG1829 fuel pump module for the 2010 Buick LaCrosse V6 3.0L and the 2011 LaCrosse V6 3.6L pumps fuel from the tank to the engine. This Delphi fuel pump module assembly is built to Delphi's OE standards.
Hard starting, stalling or a wrong fuel gauge reading can mean the module, also called a fuel pump assembly, is worn. None of these signs proves the module is at fault; a blown fuel pump fuse or a faulty relay can also leave the engine short of fuel.
This module fits the 2010 Buick LaCrosse V6 3.0L and the 2011 LaCrosse V6 3.6L, with a quantity of one module per car.
One fuel pump module with float arm, one seal and one instruction sheet.
Interchange: M10240 · MU1899 · E4022M · DFG1829 · P76895M · 13505213 · 13578385 · 19208945 · A33223 · SP4075M
This part cross-references / interchanges with the following part numbers:
Does the Delphi FG1829 fuel pump module fit the 2011 Buick LaCrosse V6 3.6L?
Yes. Delphi FG1829 fits the 2011 Buick LaCrosse V6 3.6L and the 2010 Buick LaCrosse V6 3.0L, with one module per car.
Does the Delphi fuel pump module come with a float arm and seal?
Yes. Delphi FG1829 comes with the float arm, a seal and an instruction sheet.
What does the float arm on this Delphi fuel module do?
The float arm reads the fuel level in the tank for the gas gauge. Its empty float height and float retention match OE specifications for a correct reading.
How can I tell if this Delphi module is wearing out?
Hard starting, stalling or a wrong fuel gauge reading can mean the module is worn. Fuel pressure testing is best left to a shop.
Does anything need doing to the tank before installing Delphi FG1829?
Yes. Check and clean the fuel tank first, and follow the instruction sheet that comes with the part.
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
