Delphi FG2019 fuel pump module for the 2014-2016 Hyundai Elantra 1.8L carries fuel from the tank toward the engine and includes the float arm that feeds the fuel gauge reading.
Hard starting, stalling or an unreliable fuel gauge can mean a fuel pump module is wearing out. Before you replace it, rule out a blown fuse, a faulty relay or damaged wiring, which can produce similar symptoms; a shop can also test fuel pressure.
It is a direct-fit replacement for the 2014-2016 Hyundai Elantra 1.8L, which takes one module.
Fuel pump module assembly with float arm, and an instruction sheet.
Interchange: 31110-3X520 · 31111-1R000 · 31111-3X520 · 35301-2P000 · 94460-3X520
CFG2019 · 67919 · P77081M · A33247 · SP3034M
This part cross-references / interchanges with the following part numbers:
Does the Delphi FG2019 fuel pump module fit a 2014-2016 Hyundai Elantra 1.8L?
Yes. Delphi FG2019 is matched to the 2014-2016 Hyundai Elantra 1.8L, and that application takes one module.
What comes with the Delphi fuel module FG2019?
Delphi FG2019 comes as a fuel pump module assembly with a float arm, plus an instruction sheet. Nothing else is listed in the box.
Will the float on this fuel pump assembly give a correct gas gauge reading?
Yes. Its empty float height and float retention match OE specifications, which is what supports a correct gas gauge reading.
What are the signs this Delphi module is wearing out?
A gauge that reads wrong, or the engine cranking longer before it starts, can mean the module is wearing out. A shop can test fuel delivery to confirm.
Should I clean the tank before installing this Delphi fuel pump module?
Yes. Check and clean the fuel tank before installing, and follow the instruction sheet that comes with the part.
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
