Delphi TA5759 drag link for the 2011-2016 Ford F-250 Super Duty and other vehicles links the pitman arm to the steering linkage. Also called a steering drag link, it passes the steering gear's movement along to the wheels.
- Tested below -40 degrees C and over 120 degrees C, and exposed to 720 hours of salt spray
- Necessary accessories included for a complete job
- Fatigue tested to avoid failure
- Ball studs machined to micron tolerances for durability and smooth joint operation
- Anti-corrosion protection applied to each part
Quick facts
- Part: Delphi TA5759 drag link
- Also called: steering drag link
- Fits: 2011-2016 Ford F-250 Super Duty and other vehicles
- Position: At pitman arm
- Condition: New
Loose or wandering steering, a clunk when turning or play at the steering wheel can mean the drag link is worn, but other steering parts wear in similar ways. Before replacing it, look the link over with the engine off for bends, cracks or rust, and leave joint play testing to a shop.
Fits
This 2011-2016 Ford F-250 Super Duty drag link also fits the 2011-2016 Ford F-350 Super Duty. Each truck takes one, at the pitman arm.
Specifications
Fit and size
- Position: at pitman arm
- Quantity per vehicle: 1
Build and materials
- Ball studs: machined to micron tolerances
- Corrosion protection: anti-corrosion protection on each part
- Condition: New
Interchange: 627.6581 · BC3Z 3304-A · LC3Z 3304-E
DL85051 · DL85051PR · MDOE43 · DS300040 · GS40974 · MS40974
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
627.6581, DL85051, DL85051PR, BC3Z 3304-A, LC3Z 3304-E, MDOE43, DS300040, GS40974, MS40974
Frequently Asked Questions
Does the Delphi TA5759 fit the 2011-2016 Ford F-350 Super Duty?
Yes. Delphi TA5759 fits the 2011-2016 Ford F-350 Super Duty as well as the 2011-2016 Ford F-250 Super Duty, with one drag link per truck at the pitman arm.
How are the ball studs on this Delphi drag link made?
Delphi machines the ball studs to micron tolerances, which is meant to give durability and smooth joint operation.
What temperatures and salt spray was this drag link tested to?
Delphi drag links withstand temperatures below -40 degrees C and over 120 degrees C, and are exposed to 720 hours of salt spray. They are also fatigue tested to avoid failure.
How can I tell if the drag link on my truck is worn?
Loose or wandering steering, a clunk when turning or play at the steering wheel can point to a worn drag link. A shop can test the joints for play.
Does the Delphi TA5759 come with accessories?
Yes. Delphi includes the necessary accessories for a complete job with the TA5759 drag link.
