Delphi TA3480 drag link for the 2003-2009 Chevrolet C4500 Kodiak and other vehicles carries steering movement through the steering linkage.
- Drag link withstands temperatures below -40 degrees C and over 120 degrees C in testing
- Drag link parts are exposed to 720 hours of salt spray in testing
- Drag link is fatigue tested to avoid failure
- Ball studs are machined to micron tolerances for durability and smooth joint operation
- Anti-corrosion protection is applied to each part
Quick facts
- Part: Delphi TA3480 drag link
- Also called: steering drag link
- Fits: 2003-2009 Chevrolet C4500 Kodiak and other vehicles
- Condition: New
A worn steering drag link can show up as loose or wandering steering, or as a clunk when the steering changes direction. Worn tie rods or a worn steering gear can produce similar symptoms, so with the engine off and the vehicle on the ground, look at the linkage you can see for cracks, rust or bends, and have a shop check the joints for play before replacing anything.
Fits
The 2003-2009 Chevrolet C5500 Kodiak and the 2003-2009 GMC C4500 Topkick take this drag link too, and so do other vehicles. If your vehicle is not named here, look up its year and model in the "Vehicles it fits" section.
Specifications
- Quantity per vehicle: 1
- Ball studs: machined to micron tolerances
- Corrosion protection: anti-corrosion protection on each part
- Tested temperature range: below -40 degrees C to over 120 degrees C
- Salt spray exposure: 720 hours
- Condition: New
In the box
One drag link with the accessories needed for the job. This listing holds one drag link, which is the quantity per vehicle.
Interchange: 15943453 · DS300066
Frequently Asked Questions
Does the Delphi TA3480 drag link fit the 2003-2009 GMC C4500 Topkick?
Yes. Delphi TA3480 fits the 2003-2009 GMC C4500 Topkick, and that vehicle takes one drag link.
Does the TA3480 drag link come with accessories?
Yes. The necessary accessories for a complete job come with the drag link. This listing is one drag link.
How are the ball studs on this Delphi drag link made?
The ball studs are machined to micron tolerances for durability and smooth joint operation. Anti-corrosion protection is applied to each part.
What temperature and salt spray testing do these drag links go through?
Delphi parts withstand temperatures below -40 degrees C and over 120 degrees C, and are exposed to 720 hours of salt spray. The drag links are also fatigue tested to avoid failure.
Does Delphi TA3480 replace number 15943453?
Yes. 15943453 is one of the numbers Delphi TA3480 replaces.
