Delphi Steering Tie Rod End P/N:TA5320
Delphi TA2931 inner tie rod end for the 2008-2014 Subaru Impreza and other vehicles carries steering rack movement out to the wheels. This Delphi tie rod end, also called a steering tie rod end, is the inner joint of the steering linkage.
Loose or wandering steering, a clunk when turning or uneven tire wear can mean a worn inner tie rod end. A worn outer tie rod end or ball joint can feel similar, so ask a shop to measure play in the inner joint first; that check needs the car lifted. Inner tie rod ends are normally replaced in pairs, and this listing is one.
The vehicles it fits include the 2008-2014 Subaru Impreza (the 2012-2014 cars with the H4-2.5L), the 2016-2019 Subaru WRX and the 2013-2020 Subaru WRX STI. If your Subaru is not one of these, look up its year and model in the "Vehicles it fits" section.
Fit and size
Build and materials
One inner tie rod end with the accessories needed for a complete job; the fitment lists two per vehicle.
Interchange: 101-5663 · 101-7748 · 612.47017 · SB-A601 · 34160 XA000
AX08024 · KRE4525 · TI72020 · TI72020PR · TI72080 · EV800360 · ES4524 · GS80706 · MS80706 · MS80733 · JAR750
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Is this WRX tie rod end right for a 2016-2019 Subaru WRX?
Yes. Delphi TA2931 fits the 2016-2019 Subaru WRX and the 2013-2020 Subaru WRX STI. For any other Subaru, look up its year and model in the "Vehicles it fits" section.
Is this Impreza tie rod a fit for a 2012-2014 Subaru Impreza H4-2.5L?
Yes. The 2012-2014 Subaru Impreza H4-2.5L takes Delphi TA2931, and so does the 2008-2011 Subaru Impreza.
Does the Delphi TA2931 come with the accessories needed to install it?
Yes. Delphi includes the necessary accessories for a complete job. The listing is one inner tie rod end, and the fitment lists two per vehicle.
What can a worn inner tie rod end feel like while driving?
Loose or wandering steering, a clunk when turning or uneven tire wear can go with a worn inner tie rod end.
What testing does this inner tie rod end go through?
It is tested below -40 degrees C, above 120 degrees C and for 720 hours of salt spray, and it is fatigue tested to avoid failure. Anti-corrosion protection is applied to each part.
No reviews yet — be the first to review this product.
Write a ReviewWARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.