Delphi Steering Tie Rod End P/N:TA1465
Delphi TA3746 tie rod end for the 2017-2025 Mazda CX-5 is an inner Delphi tie rod that carries steering input out to the wheels.
A worn steering tie rod end can show up as loose or wandering steering, uneven tire wear or a vibration through the wheel. These signs alone do not prove the tie rod end is at fault, since a tire that is out of balance can feel much the same.
This is a direct-fit tie rod for the 2017-2025 Mazda CX-5, which takes two, one on each side.
Delphi includes the necessary accessories for a complete job.
Interchange: K123-32-240
1018505 · 543597 · MS76728 · X32TR0344
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Does the Delphi TA3746 tie rod end fit the 2017-2025 Mazda CX-5?
Yes. Delphi TA3746 is an inner tie rod end for the 2017-2025 Mazda CX-5. The vehicle takes two, one on each side.
Is a Delphi track rod end the same as this tie rod end?
Yes. Track rod end is another name for a tie rod end, and this Delphi TA3746 is the inner one.
Before reading a Delphi tie rod review, what testing should I know this part went through?
This tie rod end withstands temperatures below -40 degrees C and over 120 degrees C, is exposed to 720 hours of salt spray and is fatigue tested to avoid failure.
What accessories come with the Delphi TA3746 tie rod end?
Delphi includes the necessary accessories for a complete job with the TA3746 tie rod end.
Does Delphi TA3746 replace K123-32-240?
Yes. K123-32-240 is one of the other numbers Delphi TA3746 replaces, along with 1018505, 543597, MS76728 and X32TR0344.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.