Delphi Suspension Ball Joint P/N:TC1724
Help keep your suspension pivoting smoothly with the Delphi ball joint, part number TC272, a front right lower suspension ball joint made from high-quality forgings for strength and smooth operation. It fits many vehicles, among them the 1990-1993 Volvo 240, 1979-1989 Volvo 244 and 1979-1989 Volvo 245. See the "Vehicles it fits" section for the full list and engine details.
A ball joint links the control arm to the steering knuckle, so the wheel can travel up and down with the suspension and turn with the steering. Delphi brings the know-how behind its OE safety technology, used on millions of vehicles worldwide, to its aftermarket steering range.
Planning a 1990-1993 Volvo 240 ball joint replacement because of clunking over bumps, loose or wandering steering, or uneven tire wear? Those signs may mean the joint needs replacing, but other worn suspension parts can cause them too, so check the joint for play and a torn boot before you order.
Interchange: 101-3267 · 610.39004 · 505-1087
1013267 · 61039004 · 5051087 · BJ04007 · KBJ4166 · B9350 · B9350PR · K9350 · FA1757 · GK9350 · MK9350 · JBJ227 · JBJ228 · 1228800 · 1273140 · 1273146 · 1330820 · 274119
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
What does the Delphi TC272 ball joint do?
It forms the pivot between the control arm and the steering knuckle at the front right lower position, letting the wheel move with the suspension and turn with the steering.
Is this the right ball joint for a 1990-1993 Volvo 240?
It is listed for the 1990-1993 Volvo 240, and it also fits the 1979-1989 Volvo 244 and 1979-1989 Volvo 245. Check the "Vehicles it fits" section to confirm your vehicle.
What kind of boot does the TC272 use?
It uses a chloroprene rubber boot, which Delphi says improves durability and helps prevent premature failure.
How is this ball joint protected against corrosion?
Delphi applies anti-corrosion protection to each part and tests its parts through 720 hours of salt spray and at temperatures from below -40°C to above 120°C.
What are signs a ball joint may need replacing?
Clunking over bumps, loose or wandering steering, uneven tire wear or a torn boot can be signs. Other worn suspension parts can cause these too, so check the joint for play first.
No reviews yet — be the first to review this product.
Write a ReviewWARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.