Delphi Suspension Ball Joint P/N:TC5882
Delphi TC4218 front upper ball joint for the 1997-2017 Jeep Wrangler and other vehicles connects the control arm to the steering knuckle. It lets the wheel turn for steering and move up and down with the suspension.
A worn suspension ball joint can mean a clunk over bumps, loose or wandering steering, or uneven front tire wear. Worn bushings or tie rod ends can make similar noises, so first look at the rubber boot for tears or leaking grease with the engine off. A shop can test the joint for play. If a worn ball joint is the cause, this one replaces it.
Listed for a wide range of Jeep and Dodge models, this is also a ball joint for the 1997-2006 Jeep TJ and the 1994-2001 Dodge Ram 1500. This listing is one ball joint. These vehicles take two, one on each side of the front axle, so order two and fit them as a pair. If your year or model is not named here, find it under the "Vehicles it fits" section.
Fit and size
Build and materials
Interchange: 68004085AA · K100311
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Is this the front upper Jeep Wrangler ball joint for a 1997-2017 Jeep Wrangler?
Yes. Delphi TC4218 is a front upper ball joint listed for the 1997-2017 Jeep Wrangler. For other years or models, look under the "Vehicles it fits" section.
Will this Dodge Ram 1500 ball joint fit a 1994-2001 Dodge Ram 1500?
Yes. The Delphi TC4218 front upper ball joint is listed for the 1994-2001 Dodge Ram 1500, and that truck takes two, one on each side.
Are the boots on this front upper ball joint made of rubber?
Yes. This ball joint has chloroprene rubber boots, which improve durability and prevent premature failure. The joint itself is made from high quality forgings.
How is this front upper ball joint tested for heat, cold and rust?
Delphi's parts withstand temperatures below -40 degrees C and over 120 degrees C, and are exposed to 720 hours of salt spray. Anti-corrosion protection is applied to each part.
Does Delphi TC4218 cross-reference to K100311?
Yes. K100311 is listed as an interchange number for Delphi TC4218, along with 68004085AA.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.