Delphi TC1449 front left lower control arm with ball joint for the 2004-2009 Mazda 3 and other vehicles links the front left wheel to the chassis and carries the ball joint. Supplied as a control arm and ball joint assembly, it replaces the arm and joint in one piece.
- Delphi control arms undergo 100% crack detection and ultrasonic flaw detection
- Control arm testing covers temperatures below -40 degrees C and over 120 degrees C and 720 hours of salt spray
- Ball studs machined to micron tolerances for durability and smooth joint operation
- Robot welding on the control arm for consistent performance and quality
- Anti-corrosion protection on each part for corrosion prevention and enhanced aesthetics
Quick facts
- Part: Delphi TC1449 control arm with ball joint
- Also called: control arm and ball joint assembly
- Fits: 2004-2009 Mazda 3 and other vehicles
- Position: Front left lower
- Condition: New
A clunk over bumps, loose-feeling steering or uneven front tire wear can mean a worn arm or ball joint. Other suspension parts can make similar noises, so with the engine off and the car parked, look over the visible parts of the arm for cracks, bends and rust before replacing it.
Fits
Besides the 2004-2009 Mazda 3, this control arm fits the 2009 Mazda 3 Sport, the 2006-2010 Mazda 5 and the 2012-2017 Mazda 5, and the front left position takes one arm on each. Control arms are normally replaced as a left and right pair; this listing is a single front left arm, and the front right is a separate part.
Specifications
Fit and size
- Position: front left lower
- Quantity per vehicle: 1
Build and materials
- Type: control arm with ball joint assembly
- Construction: robot-welded
- Ball studs: machined to micron tolerances
- Finish: anti-corrosion protection on each part
- Condition: new
Frequently Asked Questions
Does the Delphi TC1449 control arm for the 2004-2009 Mazda 3 also fit the 2009 Mazda 3 Sport?
Yes. Delphi TC1449 is a front left lower control arm with ball joint for the 2004-2009 Mazda 3 and also for the 2009 Mazda 3 Sport.
Is this a 2008 Mazda 5 lower control arm?
Yes. The 2006-2010 Mazda 5 covers 2008, and Delphi TC1449 is its front left lower arm. The front right side is a separate part.
What corrosion protection does the Delphi TC1449 have?
Anti-corrosion protection is applied to each part, and the control arm testing includes 720 hours of salt spray exposure.
What can a worn front left lower control arm feel like?
A knock from the front left corner, the car pulling to one side or steering vibration can be signs of a worn arm or ball joint.
How is the Delphi TC1449 tested for cracks and flaws?
Every arm goes through 100% crack detection and ultrasonic flaw detection. The ball studs are also machined to micron tolerances.
