Delphi Suspension Control Arm and Ball Joint Assembly P/N:TC2590
Delphi TC2248 front left lower control arm with ball joint for the 2007-2014 Mercedes-Benz CL600 and other vehicles connects the front left wheel to the chassis and pivots on its ball joint. This control arm and ball joint assembly is a single unit, so the arm and the joint are replaced together.
A clunk over bumps, uneven front tire wear or a loose, wandering feel in the steering can point to a worn arm or ball joint. Worn sway bar links, strut mounts, tie rod ends or a loose wheel bearing can be behind the same signs, so find the cause before you buy.
Delphi TC2248 is a control arm with ball joint for the 2007-2014 Mercedes-Benz CL600, the 2008-2014 Mercedes-Benz CL63 AMG, the 2008-2014 Mercedes-Benz CL65 AMG and many other vehicles. A 2008-2014 Mercedes-Benz CL63 AMG takes one on the front left. This listing is that one side; the front right is a separate part, and the other side of the axle is normally done at the same time. If your Mercedes-Benz is not named here, enter its year and model in the "Vehicles it fits" section.
Fit and size
Build and materials
Interchange: 101-6938 · 102-6938
221 330 23 11 · 221 330 63 11 · A221 330 2311 · A221 330 6311 · 521289 · KSC5453 · CB28213 · CB28213PR · CK620986 · K620986 · RK620986 · CMS101067 · CMS101281 · GS101067 · MS101067 · JTC1360
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Is this Delphi control arm right for the 2008-2014 Mercedes-Benz CL63 AMG?
Yes. Delphi TC2248 is the front left lower control arm with ball joint for the 2008-2014 Mercedes-Benz CL63 AMG and the 2008-2014 Mercedes-Benz CL65 AMG. For other models, use the "Vehicles it fits" section.
Does the ball joint come attached to this front left lower control arm?
Yes. This is a control arm with ball joint, so the joint is part of the assembly. It is made for the front left, lower forward position, and the front right is a separate part.
How does this control arm hold up to salt and temperature extremes?
The arm withstands temperatures below -40 degrees C and over 120 degrees C and is exposed to 720 hours of salt spray in testing. Anti-corrosion protection is applied to each part.
Can a worn ball joint on a control arm clunk over bumps?
Yes. A clunk over bumps, uneven tire wear or loose steering can mean a worn joint or arm. Don't keep driving on it; have it checked and replaced promptly.
Does Delphi TC2248 replace part number A221 330 2311?
Yes. A221 330 2311 is one of the numbers this Delphi TC2248 control arm replaces. The other cross-reference numbers are on the Interchange line.
No reviews yet — be the first to review this product.
Write a ReviewWARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.